P50B07020DXS6D Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07020DXS6D is a brushless servo motor in the P5 Super BL Servo Motors series with a flange size of 76 mm and an overall length of 97 mm. It features a rated output of 200 W, a rated torque of 0.637 N·m, and runs at a rated speed of 3,000 min-1. The motor includes a wiring-saved incremental encoder with a resolution of 2,000 P/R and has a protection rating of IP55.
Internal Product Review
The P50B07020DXS6D is a Sanyo Denki brushless servo motor with 200 W rated output and IP55 protection. Rated speed of 3,000 min-1 and maximum speed of 4,500 min-1 support responsive motion control in demanding servo applications. The wiring-saved incremental encoder with 2,000 P/R resolution is a standout feature for clean integration and dependable feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07020DXS6D is a brushless AC servo motor manufactured by Sanyo Denki as part of the P5 Super BL Servo Motors series. It supplies closed-loop rotary power to compact automation axes that require accurate velocity and position control. An onboard wiring-saving incremental encoder reports the rotor angle directly to the drive, simplifying feedback wiring and allowing tight synchronization with host motion controllers.
The motor delivers a continuous mechanical output of 200 W at a rated shaft speed of 3,000 rpm and develops a rated torque of 0.637 N·m. For static loads, it can continuously hold 0.686 N·m without overheating. Its torque constant of 0.348 N·m/Arms allows the drive to calculate the torque produced from the phase current. Electrical characteristics include a phase resistance of 2.5 Ω and an electrical time constant of 3.6 ms, while the mechanical time constant of 2.4 ms indicates how quickly the rotor reaches the commanded speed. A 76 mm square flange fits compatible gearboxes, and the motor has an overall length of 97 mm. The housing weighs 1.57 kg, which reduces the load placed on lightweight machine frames. The unit is supplied without a holding brake, so an external mechanism must secure vertical loads when power is removed.
The rotor can accelerate up to 4,500 rpm for short duty cycles, and the peak stall torque of 1.96 N·m supports rapid indexing and brief impact loads. The enclosure carries an IP55 protection rating, which protects the stator windings against dust ingress and low-pressure water jets. The encoder provides a resolution of 2,000 pulses per revolution, giving the controller fine incremental feedback for smooth interpolation and reduced hunting error. Brushless operation eliminates mechanical brush wear and reduces routine motor maintenance. The compact flange and low housing mass also make the motor suitable for small positioning axes where installation space and moving weight are limited.
