P50B07020DXS3FE Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B07020DXS3FE is part of the P5 Super BL Servo Motors series and utilizes brushless motor technology with a flange size of 76 mm. It features a wiring-saved incremental encoder with a resolution of 2,000 pulses per revolution and offers IP55 protection class. The motor delivers a rated output of 200 W, rated speed of 3,000 min-1, and a peak stall torque of 1.96 Newton-meters.
Internal Product Review
The P50B07020DXS3FE is a Sanyo Denki P5 Super BL servo motor with 200 W rated output and 3,000 min-1 rated speed. The wiring-saved incremental encoder and IP55 protection give the motor clean feedback performance and dependable suitability for enclosed automation equipment. CE certification and 1.96 N·m peak stall torque make the unit a strong choice for precise servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B07020DXS3FE is a brushless AC servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. It converts drive current into precise rotational motion for positioning tables, feeders, and small conveyors used in automated cells. Its compact construction and integrated feedback sensing support tightly regulated motion profiles under digital drive control. The motor is suitable for applications that require repeatable positioning and responsive speed adjustment within a limited installation space.
A square mounting flange measuring 76 mm positions the stator concentrically with compatible gearboxes and mounting brackets. At the motor terminals, the continuous mechanical output reaches 200 W at a shaft speed of 3,000 rpm. Under rated operating conditions, the rotor produces 0.637 N·m of torque while drawing 2.2 Arms from the inverter. The motor has a torque constant of 0.348 N·m/Arms, allowing the drive to calculate load response from the commanded current. Copper losses are affected by a phase resistance of 2.5 Ω, while the 3.6 ms electrical time constant affects the current rise time. Class F insulation tolerates the winding temperatures associated with full-load operation. The assembly carries CE marking for conformity with applicable European safety requirements.
For short dynamic peaks, the shaft can sustain a stall torque of 1.96 N·m, providing acceleration capacity above the continuous operating range. Speed commands can be increased to 4,500 rpm when the application requires faster movement. Start-stop response benefits from a rotor inertia of 0.386 × 10⁻⁴ kg·m², reducing the energy that must be reversed during rapid motion changes. The IP55 enclosure protects the motor from dust and low-pressure water jets. The motor is supplied without a holding brake, allowing the shaft to rotate freely when power is removed unless an external mechanical clamp is used. A wire-saving incremental encoder provides 2,000 pulses per revolution and returns position data to the drive for closed-loop motion control.
