P50B05020DXS00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B05020DXS00M is a standard brushless motor from the P5 Super BL Servo Motors series, featuring a flange size of 54 mm and IP55 protection. It delivers a rated output of 200 W, rated speed of 3,000 min-1, and has a rated torque of 0.637 N·m. The motor uses a wiring-saved incremental encoder with a resolution of 8,192 divisions.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B05020DXS00M is a brushless AC servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. This standard-design motor works with a matching drive to provide closed-loop motion control. It supports precise positioning and velocity regulation for pick-and-place modules, indexing tables, and similar motion axes in automated machinery.
This model can sustain a continuous stall torque of 0.686 N·m, while its rated running torque is 0.637 N·m. Under nominal operating conditions, the shaft turns at 3,000 rpm and produces a mechanical output of 200 W. At this operating point, the stator windings draw 1.6 A RMS. The internal torque constant is 0.436 N·m/A RMS, which relates winding current to electromagnetic torque generation. The phase resistance is 3.4 Ω, and the electrical time constant is 2.9 ms, allowing the winding current to rise rapidly in response to drive commands. The brushless design uses electronic commutation through the connected drive, eliminating the mechanical wear associated with brushes and commutators. Rotor position and speed signals are supplied by a wiring-saving incremental encoder so the drive can regulate motion through a closed control loop.
The rotor can accelerate beyond its nominal speed to a maximum of 4,500 rpm for short operating cycles, providing additional speed range for rapid machine movements. The motor carries an IP55 protection rating, which provides protection against dust and low-pressure water jets. Its square flange measures 54 mm, allowing direct mounting to compact gearheads or machine plates. The encoder returns position data in 8,192 divisions, supporting fine motion interpolation at the controller. The motor also has a mechanical time constant of 0.9 ms and a load inertia of 0.173 × 10⁻⁴ kg·m², which support quick acceleration and deceleration cycles. A holding brake is not included, so an external brake or locking mechanism must secure vertical loads when power is removed. CE and UL marks indicate conformity with applicable safety requirements for supported installations.
