P50B05020DCS4E Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B05020DCS4E is part of the P5 Super BL Servo Motors series and features a rated output of 200 watts with a voltage class of 200 VAC. This brushless motor is equipped with a holding brake, a 24V brake voltage, and a wiring-saved incremental encoder with a 2,000 pulse resolution. The flange size is 54 mm, rated speed is 3000 min-1, and peak stall torque reaches 1.96 Newton-meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B05020DCS4E is a brushless servo motor built by Sanyo Denki for the P5 Super BL Servo Motors series. As a compact rotary actuator, it provides closed-loop position and speed control for indexers, pick-and-place arms, and other factory automation axes that require repeatable motion and quick settling. The integrated incremental feedback device supports accurate motion control, while the holding brake maintains the shaft position when power is removed. This configuration is suitable for vertical loads, precision conveyor stops, and small gantries.
The brake coil is energized at 24 V, so control panels can use the same low-voltage supply that often powers sensors and interlocks. A wiring-saving incremental encoder delivers a resolution of 2,000 P/R, giving the drive detailed feedback without requiring additional cables. The square frame has a 54 mm mounting flange, allowing the unit to connect to compact gearheads or direct-drive brackets while maintaining a small footprint. When rapid moves are required, the rotor can reach a maximum speed of 4,500 rpm. An electric time constant of 2.9 ms supports a rapid phase-current response after a step command. The motor can produce a brief stall torque of up to 1.96 N·m, providing additional torque for short overloads, inertia changes, or temporary mechanical resistance.
For continuous operation, the motor produces 200 W of mechanical power at its rated speed of 3,000 rpm. Under these conditions, it provides a continuous torque of 0.637 N·m, making it suitable for light belt drives or lead-screw tables that prioritize rapid motion. The rated power rate is 24.2 kW/s, indicating the motor’s ability to convert energy during aggressive indexing cycles. A mechanical time constant of 0.9 ms helps limit speed overshoot during rapid acceleration and deceleration. The torque constant is 0.436 N·m/Arms, allowing precise current-loop sizing for stable vector control.
