P50B05010PXKS7 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B05010PXKS7 is a brushless servo motor from the P5 Super BL Servo Motors series with a rated output of 100 W and operates at 100 VAC. It features a flange size of 54 mm, an IP55 protection rating, and a rated speed of 3000 min^-1. The motor provides a continuous stall torque of 0.98 N·m, with an encoder resolution of 2,000 pulses per revolution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B05010PXKS7 is supplied by Sanyo Denki and belongs to the P5 Super BL Servo Motors series. Built on brushless technology, the unit delivers responsive rotary motion for indexing tables, conveyors, and compact robotic joints in industrial automation. It accepts velocity and position commands from a matched amplifier and relies on an incremental encoder for closed-loop feedback. Because it is not equipped with a holding brake, external measures must secure the load whenever the drive is de-energized.
At its nominal operating point the motor is energized from a 100 VAC supply and outputs 100 W of mechanical power. Shaft speed at rating is 3000 min⁻¹, adequate for light-duty positioning tasks. Steady torque reaches 0.319 N·m, while a phase current of 2.1 Arms keeps copper losses moderate. With a torque constant of 0.176 N·m/Arms, current commands from the servo amplifier translate directly into predictable torque increments. The 2,000-pulse encoder lets the controller resolve movement to 0.18 degrees per count. Phase resistance of 1.5 Ω shapes current rise, the electrical time constant is 2.6 ms, and the mechanical time constant of 1.4 ms supports rapid indexing.
The square flange measures 54 mm, so the motor fits directly onto compact gearheads or machine plates without spacers. Its housing carries an IP55 protection rating that shields internal windings from dust and low-pressure water jets encountered on packaging lines. When the axis must hold load at zero speed, the winding can accept up to 6.7 Arms, developing the 0.98 N·m continuous stall torque stated for static operation. During acceleration the rotor may be driven to 4500 min⁻¹, giving a safety margin above rated speed for recovery cycles or high-flow pump bursts. Pulse-efficient commutation maintains smooth output and limits temperature rise during long production runs.
