Product Description:

Sanyo Denki’s P50B05010DXS6D belongs to the P5 Super BL Servo Motors series. This brushless AC servo motor is supplied with an integral gear stage, allowing it to generate controlled torque and speed for indexing tables, pick-and-place heads, and other motion axes in automated production lines. The compact assembly combines the motor and gear stage in a single frame, reducing the number of separate components required in machines with limited installation space. Its integrated feedback connection also supports direct communication with compatible servo amplifiers.

With a flange size of 54 mm, the motor mounts directly to small equipment frames. Its electrical time constant of 2.5 ms indicates how quickly the phase current settles after a command, supporting responsive torque control. Phase resistance is measured at 4.9 Ω, a value that helps determine drive voltage requirements and anticipated conductor heating. The IP55 housing protects the stator against industrial dust and washdown spray. Before gear reduction, the rotor can reach a maximum speed of 4500 rpm. Position data come from a wire-saving incremental encoder that reduces the need for additional sensor wiring and connects directly to compatible Sanyo Denki servo amplifiers.

At the gearbox output, backlash is limited to 42 arcmin, supporting repeatable positioning during pick-and-place operations. The reducer transmits motion with a mechanical efficiency of 75%. Its reduction ratio of 1/15 converts motor speed into an output torque of 3.8 N·m at 200 rpm. Internally, the motor produces 0.319 N·m of continuous torque at 3000 rpm with an armature current of 1.1 A rms, corresponding to a power rating of 100 W. A torque constant of 0.319 N·m/A rms supports control-loop calculations, while Class F insulation permits winding temperatures of up to 155 °C. The motor is supplied without a holding brake, reducing added inertia and housing length for installations that use drive torque or an external clamp to secure the load.