P50B05010DXS00M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B05010DXS00M is a standard brushless servo motor in the P5 Super BL Servo Motors series. It features a 54 mm flange size, rated output of 100 W, and a rated speed of 3,000 min-1 with IP55 protection. The motor uses a wiring-saved incremental encoder and operates at a rated current of 1.1 Arms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B05010DXS00M servo motor is manufactured by Sanyo Denki within the P5 Super BL Servo Motors series. It uses a brushless, permanent-magnet excitation system to provide controlled rotary motion without the mechanical wear associated with brushes. An integrated reduced-wiring incremental encoder supplies position feedback while limiting the number of conductors required in the motor harness. This standard motor is supplied without a holding brake, so an external clamping method is required when the shaft must remain stationary after power is removed. In industrial automation systems, the motor supports closed-loop motion for conveyors, small pick-and-place axes, and general-purpose tooling stations.
The motor provides a continuous rated output of 100 W at a base speed of 3,000 rpm. At this operating point, the shaft produces 0.319 N·m of torque and draws 1.1 Arms from the drive. Its motor constant is 0.319 N·m/Arms, allowing the controller to convert current commands into corresponding torque commands. A power rate of 10.6 kW/s indicates the motor’s thermal acceleration capability. The electrical time constant is 2.5 ms, while the mechanical time constant is 1.4 ms, supporting rapid current rise and speed response. A voltage constant of 11.1 mV/rpm helps the drive estimate back electromotive force during operation. The IP55 enclosure protects the internal components against dust and water jets, helping shield the windings from moisture during washdown cycles.
For applications that require intermittent operation above the rated point, the rotor can safely reach a maximum speed of 4,500 rpm without exceeding its mechanical limit. The motor has a 54 mm flange that supports mounting to compact gearheads or direct-drive frames. Its stator resistance is 4.9 Ω, which assists the amplifier in regulating current when the supply voltage changes. The insulation system has a dielectric withstand rating of 1,500 VAC for one minute. The motor carries CE and UL certifications for applicable safety and electromagnetic compatibility requirements in industrial machinery. These approvals support installation in equipment intended for multiple international markets without altering the motor’s electrical or mechanical configuration.
