Product Description:

The P50B05010DCS2B is a compact servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. It combines brushless drive technology with an integrated planetary gear to provide controlled rotary motion for indexing tables, small conveyors, and light assembly axes. By accepting command currents from a matching drive, the unit converts electrical energy into mechanical rotation that can be precisely synchronized with sensors and PLC cycle times in automated production equipment.

Mechanical output is tailored by a gear stage with a ratio of 1/5, so the shaft delivers increased torque while reducing speed at the load. Internal gearing operates at an efficiency of 75%, allowing predictable thermal rise during continuous duty. The square flange measures 54 mm, enabling direct mounting to compact machinery frames. At the motor shaft, the unit sustains a continuous stall torque of 0.353 N·m; after reduction, the available output torque increases to meet positioning requirements. The motor has a rated power of 100 W and a maximum mechanical speed of 4500 rpm. With a phase resistance of 4.9 Ω, current draw remains modest, simplifying drive sizing and cable selection.

Peak demand events such as acceleration are supported by a peak stall torque of 0.98 N·m, providing additional capacity before current limiting occurs. A factory-installed holding brake engages at 24 V to clamp the shaft when control power is removed, and the drivetrain provides a rated torque of 0.319 N·m for continuous motion cycles. The torque constant is 0.319 N·m/Arms, allowing commanded current to be correlated with delivered torque. Gearbox backlash is limited to 100 arcmin, while a gearbox rated torque of 1.3 N·m indicates the load that the reduction stage can transmit during operation. Position feedback comes from a wiring-saving incremental encoder with a resolution of 2,000 pulses per revolution, providing fine commutation signals to the controller.