P50B05010DBE00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B05010DBE00 is a standard, brushless servo motor in the P5 Super BL Servo Motors series. It features a rated output of 100 W, rated torque of 0.319 N·m, and a rated speed of 3000 min-1. The motor is equipped with a holding brake and has a flange size of 54 mm and a shaft diameter of 8 mm.
Internal Product Review
The P50B05010DBE00 is a Sanyo Denki P5 Super BL servo motor with brushless motor technology and an integrated holding brake. Rated at 100 W with 0.319 N·m torque, this motor shows smooth servo response and dependable load handling in compact motion axes. Peak torque of 0.98 N·m gives the package strong short-term acceleration performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B05010DBE00 is a brushless AC servo motor from Sanyo Denki offered within the P5 Super BL Servo Motors series. Designed as a compact actuator, it provides closed-loop precision for positioning axes, small conveyors, and laboratory automation stages. Electronic commutation supports smooth torque production and accurate speed regulation without the brushes or mechanical commutator found in conventional DC motors. Its 54 mm square flange supports installation on compact machine frames where mounting space is limited. The motor can be paired with a compatible servo drive to regulate position, velocity, and torque during repetitive machine cycles.
Under continuous duty, the motor supplies 100 W of mechanical power while operating at a rated speed of 3000 rpm. At that operating point, the shaft produces 0.319 N·m of torque with a line current of 1.1 Arms. The motor has a torque constant of approximately 0.319 N·m/Arms, allowing the drive to calculate the current required for commanded torque. The compact P5 frame keeps the overall motor length low, while the 8 mm shaft diameter accommodates couplings used with miniature planetary gearheads. The brushless design reduces mechanical wear and audible noise during high-cycle operation. Closed-loop feedback enables the connected drive to correct position or speed deviations as the applied load changes.
During acceleration, the motor can produce a peak torque of 0.98 N·m with momentary current reaching 3.7 Arms. The three-phase stator has a resistance of 4.9 Ω, which affects winding losses and the voltage required to produce current. Its electrical time constant of 2.5 ms permits a rapid current response during fast position corrections. The maximum mechanical speed is 4500 rpm, extending the available velocity range beyond the rated operating point for rapid indexing movements. The integrated holding brake operates from a 90 V DC supply and draws 0.11 A while energized to release the rotor. When brake power is removed, the brake applies 0.353 N·m of holding torque to prevent the shaft and connected load from drifting. This arrangement is useful for vertical axes or machinery that must maintain its position while the servo system is powered down.
