P50B05005DXB75M Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B05005DXB75M is a brushless servo motor from the P5 Super BL Servo Motors series with a flange size of 54 mm and an 8 mm shaft diameter. It has a rated output of 50 W, operates at a rated speed of 3000 min-1, and is certified to CE and UL standards. This motor features IP55 protection and a rated torque of 0.159 N·m.
Internal Product Review
The P50B05005DXB75M is a Sanyo Denki P5 Super BL servo motor with brushless motor technology and a 200 VAC voltage class. Rated for 50 W output and 3000 min-1 speed, the unit delivers crisp servo response and dependable motion control in precision machinery. IP55 protection is a strong finishing detail for sustained industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B05005DXB75M servo motor is manufactured by Sanyo Denki as part of the P5 Super BL Servo Motors series. This brushless unit converts a pulse-width-modulated supply into controlled rotary motion, allowing positioning or speed regulation in compact automated machinery such as feeders, labelers, or semiconductor handlers. Its small frame and low thermal loss make it suitable for cabinets where space and ventilation are limited while still meeting CE and UL requirements for safety and electromagnetic compatibility.
Built for a nominal bus voltage of 200 VAC, the motor outputs 50 W when driven at its rated speed of 3000 rpm and develops a continuous rated torque of 0.159 N·m. Acceleration capability is enhanced by a rated power rate of 4.4 kW/s, providing rapid starts without requiring oversized drives. When the application demands higher velocity, the rotor can reach 4500 rpm without exceeding its mechanical limits. The IP55 enclosure protects the stator windings from dust and water jets, while the 54 mm square flange aligns with standard miniature gearheads. Phase resistance measures 9.2 Ω, matching common low-current amplifiers in 200 V class multi-axis controllers.
Torque reserves include a continuous stall rating of 0.167 N·m and a peak stall torque of 0.49 N·m, allowing the axis to hold or overcome static loads before motion begins. A torque constant of 0.249 N·m/A rms relates drive current directly to shaft torque, simplifying gain calculations in current-mode loops. Dynamic response is shaped by an electrical time constant of 2.1 ms and a mechanical time constant of 2.6 ms, supporting tight following-error limits. The shaft has a diameter of 8 mm, providing a compact output interface for couplings and miniature gearheads. The motor is supplied without a holding brake to minimize mass, so an external mechanism must retain the load when unpowered if the application requires stationary holding.
