P50B04010DXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B04010DXS00 is part of the P5 Super BL Servo Motors series and uses a wiring-saved incremental encoder with a resolution of 2000 pulses per revolution. This brushless motor provides a rated output of 100 W, rated torque of 0.319 Nm, and operates at a rated speed of 3000 rpm. The motor has a flange size of 40 or 42 mm, weighs 0.59 kg, and has an IP40 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B04010DXS00 is a brushless servo motor manufactured by Sanyo Denki for the P5 Super BL Servo Motors series. Designed for compact positioning stages and feed drives, the unit converts drive current into controlled rotary motion while supplying incremental feedback to the controller. Its wiring-saving incremental encoder has a resolution of 2,000 pulses per revolution, allowing direct cable routing to a matching amplifier without extra interface boards. This detector configuration simplifies installation and supports precise velocity control in pick-and-place machines and light conveying equipment.
The motor delivers a continuous mechanical output of 100 W when operated at its rated shaft speed of 3,000 rpm. At that operating point, it produces 0.319 N·m of torque while drawing only 1.0 Arms from the drive, with a phase resistance of 7.0 Ω and a torque constant of 0.333 N·m/Arms. As a standard motor design within the P5 platform, it uses a 40 or 42 mm square flange that fits directly onto small gearheads and linear stages. The electrical time constant is 1.5 ms, allowing current to rise quickly in response to drive commands. The housing carries an IP40 protection rating for use inside clean control enclosures.
When rapid acceleration is required, the rotor can withstand a stall torque of 0.98 N·m and can be driven up to a peak speed of 4,500 rpm without losing synchronization. These dynamic limits are supported by a mechanical time constant of 1.4 ms, so the shaft can reach the commanded velocity quickly. The frame weighs only 0.59 kg, reducing the load placed on mounting structures. The winding insulation withstands 1,500 VAC for one minute during dielectric testing. Because the motor is supplied without a holding brake, external clamping or drive torque must be used to maintain its position when power is removed.
