P50B04010DCXS9 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B04010DCXS9 is a brushless servo motor that belongs to the P5 Super BL Servo Motors series. It features a rated output of 100 W, a flange size of 40 or 42 mm, and is equipped with a holding brake. This motor offers a maximum speed of 4500 min-1 and a protection rating of IP40.
Internal Product Review
The P50B04010DCXS9 is a Sanyo Denki servo motor with a 100 W rating and IP40 protection. Rated speed of 3000 min-1 and peak torque of 0.98 N·m give the unit a responsive, well-balanced feel in precision motion service. An equipped holding brake with 24V actuation adds dependable axis retention, a valuable feature for controlled positioning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B04010DCXS9 is a brushless servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. It supplies closed-loop rotary power for positioning tables, pick-and-place heads, and other compact automation axes where fast response and repeatable motion are required. A flange measuring 40 or 42 mm on each side allows the unit to mount directly to miniature gearboxes or machine frames.
This motor delivers a rated mechanical output of 100 W while turning at a nominal speed of 3000 rpm. At that operating point, it generates 0.319 N·m of continuous torque and draws 1.0 A RMS from the drive amplifier. The relationship between current and torque is represented by a torque constant of 0.333 N·m/A RMS. The stator winding has a phase resistance of 7.0 Ω and an electrical time constant of 1.5 ms, which assist current regulation and limit sudden current changes. The coupled rotor has a mechanical time constant of 1.4 ms, supporting rapid speed changes with controlled response. An integral holding brake maintains the shaft position when power is removed, and its friction surfaces engage automatically through spring force.
For dynamic movements that exceed the rated operating point, the shaft can accelerate to a maximum speed of 4500 rpm and produce a peak torque of 0.98 N·m. The motor also provides a stall torque of 0.353 N·m for static loads. Its power-rate index is 13.8 kW/s, indicating how quickly the motor can increase its mechanical output from zero during short operating cycles. A brake coil rated at 24 V releases the mechanical clamp when control power is applied, simplifying integration with emergency-stop circuits. The enclosure has an IP40 rating, providing protection against solid objects larger than 1 mm but no protection against water. The motor is therefore intended for clean, protected locations rather than areas exposed to liquids or heavy contamination.
