P50B04010DCS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B04010DCS00 is part of the P5 Super BL Servo Motors series and features brushless motor technology with a flange size of 40 or 42 mm. This standard motor has a rated output of 100 W, a rated speed of 3000 min-1, and a peak stall torque of 0.98 N·m. It comes equipped with a wiring-saved incremental encoder with a 2000 P/R resolution and an IP40 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B04010DCS00 is a brushless servo motor produced by Sanyo Denki for the P5 Super BL Servo Motors series. It is intended for industrial automation axes that require accurate velocity and position control, including small gantry stages, electronic assembly tools, and compact positioning equipment. The motor converts drive commands into controlled rotary motion, allowing connected machinery to maintain repeatable movement under changing loads. Its compact frame supports installation in confined spaces where rapid response and consistent torque are important.
The unit delivers a continuous output of 100 W at a rated speed of 3000 rpm. It produces a rated torque of 0.319 N·m while drawing 1.0 Arms from the drive. Phase resistance is 7.0 Ω, and the electrical time constant is 1.5 ms, allowing current to rise quickly in response to command changes. A mechanical time constant of 1.4 ms further supports responsive acceleration and deceleration. Position feedback is supplied by a wire-saving incremental encoder with a resolution of 2,000 pulses per revolution, reducing the number of separate sensor conductors required for connection. The flange measures 40 or 42 mm, and the housing has an overall length of 127 mm, allowing the motor to fit within compact mounting spaces. An internal holding brake operates from a 24 V supply and engages when brake power is removed, preventing the shaft from moving during a loss of power. The brushless design minimizes wear associated with mechanical commutation and reduces routine maintenance requirements.
During transient operation, the shaft can reach 4500 rpm and withstand a peak stall torque of 0.98 N·m without demagnetizing the rotor. A torque constant of 0.333 N·m/Arms establishes the relationship between commanded current and developed torque, supporting accurate current regulation by the servo drive. The housing has an IP40 protection rating, which prevents entry by solid objects larger than 1 mm but does not provide protection against water. This enclosure is suitable for clean indoor equipment and electrical cabinets where the motor is not exposed to moisture or heavy airborne contamination.
