P50B04007DCL61 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B04007DCL61 is a servo motor from the P5 Super BL Servo Motors series. It features a permanent magnet excitation system, flange type installation, and a maximum rotating speed of 4,500 min-1. This motor is fully enclosed, self-cooled, has an IP40 protection rating, and is designed for ambient humidity between 20 and 90 percent RH.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B04007DCL61 is a compact motor unit produced by Sanyo Denki within the P5 Super BL Servo Motors series. It delivers precisely controlled rotary motion for pick-and-place heads, small indexing tables, and other axes that need accurate speed and position feedback in industrial automation. Its brushless architecture allows the unit to fit into OEM equipment where limited space and low inertia are priorities. When paired with a suitable amplifier, it converts drive commands into rapid shaft movement for high-cycle packaging, semiconductor handling, and laboratory automation stages.
At its continuous operating point, the rotor turns at 3,000 rpm, while momentary surges up to 4,500 rpm support rapid load acceleration. A fail-safe mechanism is available because the integrated brake engages when supplied with 24 VDC, preventing drift on vertical axes. The motor carries an IP40 rating, so its frame blocks tool-sized debris but requires installation inside an enclosure protected from splashing liquids. Mechanical integration follows the JIS 42 mm square pattern, and the flange measures 42 mm on each side, allowing direct attachment to micro gearheads or linear actuators. The internal windings have an insulation resistance of 10 MΩ at 500 VDC. A fully enclosed, self-ventilated housing cools the motor while minimizing particle exchange with the surrounding workspace.
The magnetic circuit uses a permanent-magnet excitation system, eliminating field wiring and reducing heat generation during standstill. The acceptable ambient humidity range is 20% to 90% RH without condensation, enabling operation in production rooms with humidified air. Long-term storage is permitted between -20 and +65 °C, allowing spare units to remain in unconditioned facilities within this temperature range. During dielectric withstand testing, the windings tolerate 1,500 VAC for one minute. The motor also has a V15 vibration grade and supports flange mounting. Its fully enclosed, self-cooling arrangement allows the motor to sustain repetitive duty cycles without external fans.
