P50B04006DXS0N Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P50B04006DXS0N is part of the P5 Super BL Servo Motors series and uses brushless motor technology with a flange size of 40 or 42 mm. It features a rated output of 60 W, rated speed of 3,000 min-1, and a protection class of IP40. This servo motor has a continuous stall torque of 0.216 N·m and weighs 0.46 kg.
Internal Product Review
The P50B04006DXS0N is a Sanyo Denki P5 Super BL servo motor with 60 W rated output and 4500 min⁻1 max speed. A wiring-saved incremental encoder and IP40 protection support clean integration and stable operation, an excellent combination for reliable servo duty.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B04006DXS0N servo motor is manufactured by Sanyo Denki as part of the P5 Super BL Servo Motors series. It is a brushless permanent-magnet unit intended to provide precise speed and torque control for small actuators, pick-and-place modules, and other light-duty axes in industrial automation lines. Its compact flange and low rotor inertia make it suitable for fast, repetitive positioning tasks. The motor’s brushless design also eliminates mechanical commutator wear during frequent acceleration and deceleration cycles.
During continuous operation at its rated point, the motor delivers 60 W of mechanical output at a shaft speed of 3,000 rpm. It produces a rated torque of 0.191 N·m while drawing a phase current of 0.7 Arms. These values represent the permitted thermal steady-state operating range of the Class F insulation system. For zero-speed holding, it can sustain 0.216 N·m of continuous stall torque without overheating, and the corresponding continuous stall current is 0.76 Arms. Its phase resistance is 10.4 Ω, which influences the voltage required from the drive. Position feedback is supplied through a wiring-saved incremental encoder, allowing the drive to monitor rotor movement for closed-loop control. The 40 or 42 mm square flange permits direct mounting on compact machinery without requiring a large mounting surface.
Dynamic loads are supported by an instantaneous stall torque of 0.647 N·m, produced with a current of up to 2.7 Arms for brief acceleration during indexing moves. The rotor inertia is 0.054 × 10⁻⁴ kg·m², which supports quick changes in speed, while the torque constant of 0.304 N·m/Arms relates drive current to shaft torque. A maximum speed of 4,500 rpm provides additional speed capacity above the continuous operating point. The enclosure has an IP40 rating, so the motor should be installed where it is protected from liquids and fine contaminants. With a mass of 0.46 kg, the unit adds little weight to mobile axes. The motor is supplied without a holding brake, so an external mechanism or drive-applied torque must retain stationary loads. Its Class F insulation supports a maximum winding temperature of 155 °C.
