P50B04006DXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Sanyo Denki P50B04006DXS00 is a standard brushless motor from the P5 Super BL Servo Motors series with a rated output of 60 Watts and a protection rating of IP40. It features a detector resolution of 2,000 P/R using a wiring-saved incremental encoder, and has a mass of 0.46 kilograms with a flange size of either 40 or 42 millimeters. The motor operates at a rated speed of 3,000 min-1 and a maximum speed of 4,500 min-1, with a voltage class of 200 VAC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P50B04006DXS00 is a brushless servo motor produced by Sanyo Denki within the P5 Super BL Servo Motors series. It uses a standard motor design that combines a compact 40 or 42 mm flange with a total mass of only 0.46 kg, making it suitable for tightly spaced machine axes. By using brushless technology, the unit delivers closed-loop speed and position control for pick-and-place heads, small conveyors, and light-duty actuators in industrial automation.
The continuous output reaches 60 W, indicating the power the shaft can deliver without overheating. At this operating point, the motor provides a torque of 0.191 N·m while rotating at 3,000 rpm. These values establish the working speed and torque range when the motor is paired with a line current of 0.7 Arms. The winding is designed for a supply of 200 VAC, allowing connection to common servo drives in that voltage class. An enclosure rating of IP40 makes the motor suitable for clean, dry locations while helping keep the frame light. For brief accelerations, the rotor can reach 4,500 rpm, expanding the available speed range for fast indexing moves.
Electrical characteristics include a phase armature resistance of 10.4 Ω, which influences the current rise time detected by the drive amplifier. A torque constant of 0.304 N·m/Arms links commanded current to produced torque, supporting precise current-loop tuning. When the load demands a short surge, the shaft can withstand an instantaneous stall torque of 0.647 N·m without demagnetization. Position feedback is supplied by a wire-saving incremental encoder with a resolution of 2,000 P/R, reducing the cable count while maintaining accurate feedback. The rotor inertia is 0.054 × 10⁻⁴ kg·m², supporting quick reversals during repetitive motion. The unit is supplied without a holding brake, so an external mechanism must secure vertical loads when power is removed.
