P30B06020PXKAR

Product Description:

The P30B06020PXKAR is a Sanyo Denki servo motor designed to be combined with a compatible drive controller to form a quick response automation system perfect for production and processing operations in the industries. This motor is able to produce a rated power output of 200 watts during operation; its average operation speed is also estimated to be about 3000 revolutions per minute. The P30B06020PXKAR industrial servo motor is a permanent magnet-excited device that maintains low inertia during operation and does not produce extreme noise of vibration. The maximum possible operation speed for this motor unit is estimated to be approximately 4500 revolutions per minute.

The P30B06020PXKAR> servo motor is an < that should be properly shielded from possible contaminants like dust and water splash. Throughout its operation, this unit maintains an impressive power rate; the size of the motor is also about 50 per cent smaller than conventional motor units from Sanyo Denki. The rated armature current required by this motor unit is about 4.6 amperes; it can also withstand a maximum stall armature current of about 15.8 amperes. The P30B06020PXKAR has a phase armature resistance of 0.39 ohms, an electrical time constant of 3.6 milliseconds and a mechanical time constant of about 0.71 milliseconds.

The P30B06020PXKAR is not equipped with an internal air blower; excess heat is conducted to its housing, where it is efficiently dissipated via natural convection or conduction. Customers are able to operate this motor unit in cold regions; the minimum permissible ambient temperature for the motor is 0 degrees Celsius. Humidity can also reach levels as high as 90 per cent without any significant damage to the motor performance levels. The P30B06020PXKAR features an internal temperature sensor which drive controllers can use to quickly detect overheating before it causes any damage to the motor.