P20B13600HXSH6E Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The P20B13600HXSH6E is a brushless servo motor from Sanyo Denki, part of the P2 Super BL Servo Motors series. It features a 130 mm flange size, flange mounting, and operates at a maximum speed of 3000 min-1. The motor is equipped with a wiring-saved incremental encoder at 2000 pulses per revolution and has fully closed, self-cooling protection.
Internal Product Review
The P20B13600HXSH6E is a Sanyo Denki P2 Super BL servo motor with brushless motor technology and permanent-magnet excitation. A wiring-saved incremental encoder with 2,000 P/R resolution supports clean feedback and dependable motion control. Fully closed self-cooling protection and continuous duty make the unit especially appealing for steady industrial service.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P20B13600HXSH6E is a brushless servo motor from Sanyo Denki’s P2 Super BL Servo Motors series. The motor converts electrical commands from a compatible drive into precise rotary motion. It is designed for closed-loop positioning and speed control in pick-and-place devices, packaging stations, and other automated machinery.
This model uses a flange mount with a face measuring 130 mm, allowing direct coupling to compatible gearboxes or machine frames. A reduced-wiring incremental encoder provides feedback at a resolution of 2,000 P/R, enabling the drive to detect 0.18 degrees of shaft rotation per pulse. The rotor uses a permanent-magnet excitation system that reduces rotor losses during operation. The stator windings tolerate a dielectric test voltage of 1,500 VAC for one minute to verify insulation integrity. The maximum mechanical speed is 3,000 rpm, supporting rapid indexing cycles in automated equipment. The motor is rated for continuous operation when it is used within its permitted load and temperature limits. The windings have an insulation resistance of 10 MΩ or higher when tested to ground at 500 VDC. A fully enclosed, self-cooled housing manages heat without a separate cooling fan. An integral shaft seal helps prevent dust and process fluids from reaching the bearings and other internal components.
The motor supports ambient relative humidity from 20% to 90% RH when condensation is prevented. Its permitted long-term storage temperature ranges from -20 to 65 °C, allowing the unpowered unit to be kept in a variety of indoor storage environments. The motor uses a Class F insulation system, which permits winding temperatures up to 155 °C. No holding brake is installed, so drive torque or an external locking mechanism must maintain the shaft position while the machine is at rest. The motor carries the CE marking, indicating the manufacturer’s declaration of conformity with applicable European safety and electromagnetic compatibility requirements. Proper grounding, compatible drive settings, and suitable mechanical alignment are still required when the motor is incorporated into automated equipment.
