P20B10200LCL67 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P20B10200LCL67 is part of the P2 Super BL Servo Motors series and features a rated output of 2000 W with a rated speed of 3000 rpm. It has a continuous stall torque of 7.36 Nm, utilizes brushless motor technology, and is equipped with a 24V holding brake. The motor uses a fully closed, self-cooling protection system and has a flange size of 100 mm.
Internal Product Review
The P20B10200LCL67 is a Sanyo Denki brushless servo motor with 2000 W rated output and 6.37 N·m rated torque. Permanent magnet excitation and a fully closed self-cooling design support precise response and dependable operation in continuous-duty service. A 19.6 N·m max stall torque stands out as a strong performance advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P20B10200LCL67 is a brushless AC servo motor manufactured by Sanyo Denki within the P2 Super BL Servo Motors series. Designed for industrial automation axes, it converts commanded current into tightly regulated rotary motion for positioning, speed control, and load following. A permanent-magnet rotor and fully enclosed housing minimize maintenance while supporting precise operation in assembly lines, material-handling stations, and packaging equipment.
Its rated mechanical output is 2000 W, delivered at a shaft speed of 3,000 rpm with a continuous torque of 6.37 N·m. These values support drive sizing and thermal calculations for continuous operation. Dynamic response is enhanced by an electrical time constant of 13 ms. The mounting interface is a 100 mm square flange that bolts directly to gearheads and machine plates. Brushless motor technology and a permanent-magnet excitation system eliminate brush wear, while the fully enclosed, self-cooling design allows operation with F-class insulation without forced air. The motor has a continuous-duty rating, includes a shaft seal that resists lubricant ingress, and conforms to vibration grade V10.
The motor supplies 7.36 N·m of continuous stall torque for static loading and withstands peak torque of up to 19.6 N·m without demagnetization. An integrated brake powered by 24 V clamps the shaft during emergency stops or holds it in position when power is removed. Coil insulation tolerates dielectric testing at 1,500 VAC for one minute, supporting installation in systems that require reinforced isolation. The motor achieves a power-rate density of 148 kW/s to accommodate rapid acceleration on high-performance motion stages. This high power-rate density supports responsive changes in speed when the connected load remains within the motor’s permitted operating range.
