P20B10200LBS2W Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P20B10200LBS2W is a brushless servo motor from the P2 Super BL Servo Motors series with a rated output of 2000 W and a rated speed of 3,000 revolutions per minute. It features a flange size of 100 mm, a shaft diameter of 22 mm, and is equipped with a holding brake and a wiring-saved incremental encoder. The motor delivers a continuous stall torque of 7.36 Newton-meter and uses a fully closed, self-cooling protection system.
Internal Product Review
The P20B10200LBS2W is a Sanyo Denki brushless servo motor with a permanent-magnet excitation system, well suited for accurate industrial positioning. Continuous-duty operation and 2000 W rated output give the motor a strong performance margin in steady production cycles. A wiring-saved incremental encoder and 19.6 N·m max stall torque make this model especially appealing for responsive, high-load servo applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P20B10200LBS2W is a servo motor produced by Sanyo Denki for the P2 Super BL Servo Motors series. It uses a permanent-magnet excitation system and a wire-saving incremental encoder to provide real-time position feedback to the drive amplifier. In industrial automation, this brushless motor provides closed-loop rotary motion for pick-and-place axes, packaging spindles, and other equipment where flange mounting and an integrated holding brake simplify machine design.
During continuous operation, the motor delivers 2,000 W of mechanical power and produces a rated torque of 6.37 N·m at a rated speed of 3,000 rpm. The flange measures 100 mm across and allows the housing to be mounted directly to a machine frame. Its V10 vibration grade supports stable operation without additional damping hardware under normal installation conditions. A holding brake rated for 90 V secures the shaft when motor power is removed, while a shaft seal helps protect the internal components. The fully enclosed, self-cooled housing dissipates heat without requiring a separate cooling fan. The motor uses Class F electrical insulation and has an insulation resistance of at least 10 MΩ to ground when measured with 500 V DC. Its continuous-duty rating supports extended operation when the load remains within the rated torque and thermal limits.
For overload events, the brushless design provides 7.36 N·m of continuous stall torque and can momentarily produce up to 19.6 N·m of peak torque without demagnetizing the permanent magnets. This temporary torque capacity provides additional force for acceleration, deceleration, and brief load disturbances without changing the motor’s continuous operating limits. Mechanical power is transmitted through a shaft with a 22 mm diameter, which withstands the forces generated at peak torque when the connected load is properly aligned. The windings withstand 1,500 VAC for one minute during dielectric testing, confirming adequate electrical separation within the stator. The sealed housing limits the entry of contaminants, and the shaft seal provides added protection around the rotating output interface.
