P20B10150VBS2N
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Sanyo Denki P20B10150VBS2N, part of the P2 Super BL Servo Motors series, is built with a high carbon alloy steel shaft, boasting a diameter of 20 mm. It features a lead of 10 mm and a C7 accuracy grade. The ball screw is preloaded for minimal axial play and has a dynamic load rating of approximately 13,000 N.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P20B10150VBS2N is one of Sanyo Denki most reliable products. It is a super motor unit that is able to support a rated load of 30 kilograms and a thrust load as high as 30 kilograms during operation. This motor unit is an IP67 product that has the unique ability to effectively withstand water penetration into its enclosure and maintain a performance efficiency level higher than 90 per cent in environments that are considered to be too harsh and unfavorable for conventional industrial motor design. After this motor is installed and prepared for operation, it should be connected to a reliable grounding connection that prevents electrical accidents caused by leakage current. Also, for best performance, this unit should be used in combination with the servo amplifier that belongs to the PY product series.
The P20B10150VBS2N industrial motor can maintain a dielectric strength of 1500 volt ampere for a duration of 1 minute during its operation; its insulation resistance is also measured to be about 10 megaohms. Customers who do not desire to use this product immediately can store it for extended periods; however, the storage ambient temperature is expected to be maintained between -10 to 65 degrees Celsius. The vibration class of this motor unit is V10, and the vibration resistance is in both the vertical and horizontal directions. Its coating color is the Munsell N1.5 equivalent.
Although this product has been designed for waterproof operation, it will only conform to this standard when waterproof accessories like the conduit, shell, and clamp are used with it. The holding brake installed in this motor unit operates at a brake release time of 100 milliseconds and can produce a torque as high as 7.84 newton meters.
Frequently Asked Questions about P20B10150VBS2N:
Q: Can the P20B10150VBS2N be used in any humidity level?
A: Although the P20B10150VBS2N has an IP67 water proof housing, it should still be operated in ambient humidity of between 20 to 90 percent.
Q: What is the proper mounting orientation for the P20B10150VBS2N?
A: The P20B10150VBS2N can be mounted in both the vertical and horizontal direction.
Q: Is the P20B10150VBS2N delivered with connection cables?
A: No. Connection cables are not part of the delivery package of this motor. These are to be separately ordered.
Q: What type of drive controller is compatible with the P20B10150VBS2N?
A: The P20B10150VBS2N can be used with drive controllers from the same manufacturer. The PY controller series is an example of compatible devices.
Q: How is the P20B10150VBS2N different from other motor units?
A: This motor has a small size, it is easy to install and has a high response and performance rate.
