P20B10150DCL22 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P20B10150DCL22 is a brushless motor from the P2 Super BL Servo Motors series with a rated output of 1500 W and a rated speed of 3000 min-1. It features a continuous stall torque of 4.90 N·m, is equipped with a holding brake operating at 24V, and has a 100 mm flange size with a 22 mm shaft diameter.
Internal Product Review
The P20B10150DCL22 is a Sanyo Denki P2 Super BL brushless servo motor with 1500 W rated output and 3000 min⁻1 rated speed. Rated torque of 4.79 N·m and peak stall torque of 14.7 N·m give the unit strong acceleration and dependable load handling. An equipped holding brake with 24 V operation adds practical axis retention, making the motor a very capable choice for precise motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P20B10150DCL22 is a brushless AC servo motor manufactured by Sanyo Denki for the P2 Super BL Servo Motors series. It provides precise rotary motion for industrial automation axes by converting controlled current from a drive into accurate output torque. The unit is equipped with a holding brake so suspended or vertical loads remain fixed during power loss, while its integrated feedback and compact mounting interface support direct installation on robots, conveyors, or indexing tables without additional adapters.
A square flange measuring 100 mm establishes the mechanical envelope, while the stator delivers 1500 W of continuous mechanical power at the shaft. During steady operation, the motor sustains a continuous stall torque of 4.90 N · m. At its rated operating point, it turns at 3000 rpm and draws a phase current of 8.4 A RMS. Internally, the winding has a resistance of 0.42 Ω and an electrical time constant of 13 ms, indicating the electrical load presented to the amplifier. The torque constant of 0.65 N · m/A RMS relates commanded current to the torque produced by the motor. A voltage constant of 22.6 mV per rpm influences back electromotive force as rotational speed changes, while the holding brake operates from a 24 V supply. The rotor has a mechanical time constant of 0.59 ms, supporting rapid speed response and tight servo control in packaging, labeling, and semiconductor equipment.
For short bursts, the motor withstands a peak stall torque of 14.7 N · m, allowing it to accelerate tooling with substantial inertia without requiring a larger motor. The 22 mm shaft diameter provides a rigid coupling surface for keyed connections, clamping couplings, or shrink-fit hubs. The assembly can reach a maximum speed of 4500 rpm before approaching its electrical back-EMF limit, providing additional speed capacity for brief high-velocity movements. Continuous operation should remain within the stated power, current, and thermal limits to prevent excessive winding temperature. Appropriate drive tuning can use the motor’s low mechanical time constant to maintain responsive acceleration and stable positioning under changing loads.
