P20B10100HXS00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P20B10100HXS00 is a brushless servo motor from the P2 Super BL Servo Motors series. It delivers a rated output of 1000 W and a rated torque of 3.19 N·m, with a peak stall torque of 10.3 N·m. The motor has a flange size of 100 mm, overall length of 147 mm, and weighs 5.4 kg. It features a wiring-saved incremental encoder with a resolution of 2,000 P/R and a maximum speed of 3000 min-1.
Internal Product Review
The P20B10100HXS00 is a Sanyo Denki P2 Super BL servo motor with 1000 W rated output and brushless motor technology. A 3.19 N·m rated torque paired with 3000 min-1 max speed supports responsive axis motion and stable servo tuning. The wiring-saved incremental encoder with 2,000 P/R resolution adds clean feedback integration, making the motor a strong choice for precise motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P20B10100HXS00 is a brushless servo motor manufactured by Sanyo Denki for the P2 Super BL Servo Motors series. Built with brushless motor technology, it supplies closed-loop shaft power to positioners, feeders, and other motion axes in industrial automation where compact size and dependable torque delivery are required. The square mounting face measures 100 mm, allowing the motor to fit common IEC flanges without an additional mounting adapter.
The shaft delivers a continuous output of 1000 W at a rated torque of 3.19 N·m. At stall, the motor can maintain a continuous holding torque of 3.92 N·m under the required cooling conditions without thermal overload. The maximum speed is 3000 rpm, and position feedback comes from a wire-saving incremental encoder that provides 2,000 pulses per revolution to the drive. Electrical characteristics include a rated phase current of 4.1 Arms, a phase resistance of 1.6 Ω, an induced voltage constant of 31.2 mV/rpm, and an electrical time constant of 10 ms. The mechanical time constant is 0.89 ms, supporting a rapid response to changes in commanded speed or torque. Rotor inertia is 1.55 × 10⁻⁴ kg·m², which helps the motor accelerate and decelerate during short positioning cycles. A 22 mm keyed shaft provides positive engagement with compatible couplings and pulleys. The overall length is 147 mm, allowing installation in compact machine spaces while leaving room for cables and connectors.
The motor has a peak stall torque of 10.3 N·m, providing additional torque for acceleration and short shock loads. Its torque constant is 0.89 N·m/Arms, supporting predictable current control when paired with a compatible servo drive. The assembly weighs 5.4 kg, which limits the mounting load on smaller gantries and motion platforms. Because the motor is supplied without a holding brake, an external brake or servo lock is required when a vertical axis must remain stationary. The brushless stator reduces mechanical wear because electronic commutation replaces brushes and their associated contact surfaces. The 147 mm housing provides space for the active motor components while retaining access for the power and feedback connections.
