Product Description:

The P10B13100HXS22 is a brushless servo motor manufactured by Sanyo Denki and assigned to the P1 Super BL Servo Motors series. It is intended for industrial automation tasks that require repeatable velocity and position control, such as indexing tables or robotic joints where fast response and compact mounting are important. The motor functions as the electromechanical actuator in a closed-loop axis, converting drive current into rotary motion while its internal sensor returns shaft-position data to the controller. Its brushless design eliminates commutator wear and supports continuous operation in machinery with frequent acceleration and deceleration cycles.

This model delivers a continuous mechanical output of 1000 W and can reach a maximum speed of 3000 rpm, allowing a wide range of process speeds without mechanical gear changes. A wiring-saving incremental encoder provides a resolution of 6,000 P/R, allowing the controller to issue fine motion commands with minimal following error. The square flange measures 130 mm, matching common frame dimensions for straightforward integration with industrial machinery. The stator winding withstands 1,500 VAC for one minute, indicating adequate insulation integrity during high-potential testing. The winding insulation is rated as class F, allowing it to tolerate the temperatures associated with this thermal class without premature degradation. The motor does not include a holding brake, so external clamping or drive-applied torque must secure vertical loads when power is removed.

The magnetic circuit uses a permanent-magnet excitation system that provides high torque density while keeping rotor inertia low. The motor has a fully enclosed housing with self-cooling fins, allowing ambient air to move along the exterior without exposing internal components to contamination. Dynamic balance meets vibration grade V10, reducing oscillations transmitted to adjacent mechanisms during operation. The flange-mounted design centers on the pilot diameter and is secured with four bolts, providing stable alignment with the driven equipment. A shaft seal blocks lubricant migration along the shaft and helps protect the encoder chamber from contamination. These mounting and sealing features support installation near gearboxes, couplings, or other mechanisms where lubricant may be present.