P10B10120HXSB1 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
The Sanyo Denki P10B10120HXSB1 is a brushless servo motor from the P1 Super BL Servo Motors series, featuring a permanent magnet excitation system and a flange size of 100 mm. It supports a maximum speed of 3000 min-1, is equipped with a wiring-saved incremental encoder with a 6,000 P/R resolution, and has an IP67 protection code. This motor uses a fully closed, self-cooling method and has insulation grade F.
Internal Product Review
The P10B10120HXSB1 is a Sanyo Denki brushless servo motor rated for continuous duty. Fully closed self-cooling construction with IP67 protection gives the motor strong suitability for enclosed industrial equipment. A wiring-saved incremental encoder supports clean feedback integration, with 6,000 P/R resolution standing out as a key performance spec.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P10B10120HXSB1 belongs to the Sanyo Denki P1 Super BL Servo Motors series and is intended for precision axis control in industrial automation cells. This brushless motor uses permanent-magnet excitation to provide consistent torque while reducing the maintenance associated with brushes and mechanical commutation. A wiring-saving incremental encoder provides rotor position feedback to the drive without requiring additional sensor cabling. The motor supports flange mounting for direct attachment to compatible gearboxes and machine frames. Its continuous-duty rating allows it to operate under load for prolonged production cycles without scheduled pauses between normal operating periods.
The housing has a fully enclosed, self-cooling design, so it does not require an external fan to remove heat during operation. Motion feedback has a resolution of 6,000 pulses per revolution, allowing the connected drive to maintain precise velocity and position control with limited interpolation overhead. A square flange measuring 100 mm provides a compact mechanical interface for installation on machinery. The rated shaft speed reaches 3,000 rpm, making the motor suitable for direct coupling in moderate-speed production equipment. The stator insulation withstands 1,500 VAC for one minute, which helps protect the motor against insulation breakdown and ground faults. These electrical and mechanical characteristics support controlled acceleration, stable operation, and accurate positioning under continuous industrial loads.
The enclosure carries an IP67 ingress protection rating, and an installed shaft seal helps prevent liquids from entering the bearing cavity. The windings use Class F insulation, which supports an insulation-system temperature limit of 155 °C. The motor has no holding brake, so an external brake or locking mechanism must secure vertical loads when power is removed. Its vibration level is rated at V10, indicating the permitted vibration range for stable operation and reliable encoder feedback. The sealed enclosure supports use in areas exposed to dust, moisture, or routine washdown, provided that installation conditions remain within the motor’s operating limits. External load-retention equipment should be selected according to the axis orientation and the force required to prevent unintended movement during a power-off condition.
