MC1K-U100V Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
16 Seconds
The MC1K-U100V is a motion controller manufactured by Sanyo Denki as part of the K SANMOTION Motion Controllers series. It supports a single axis, uses an absolute encoder with a resolution of 8,192 pulses per rotation, and features built-in dynamic and regenerative resistors. The controller can output a maximum current of 100 A, has a position output with 16 points, and achieves a linear axis unit of 0.01 mm or a rotary axis unit of 0.01 degrees.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MC1K-U100V is a motion controller produced by Sanyo Denki for the K SANMOTION Motion Controllers series. It supervises one servo drive and associated feedback devices, issuing position and current commands so the connected machine axis reaches its programmed coordinates during automated cycles. This model is intended for compact machinery that requires only 1 physical axis, making it suitable for dedicated positioning and indexing applications.
Position feedback is obtained through an absolute encoder with a resolution of 8,192 pulses per revolution, providing fine incremental data to the control loop. Parameter uploads and diagnostic data travel over the High-performance CAN network at 625 kbps, and the bus can extend up to 500 m without repeaters. Linear moves are calculated with a granularity of 0.01 mm, while rotary commands are processed in increments of 0.01°. These control increments support precise movement in pick-and-place equipment and indexing tables. A built-in dynamic brake resistor and regenerative resistor dissipate excess energy so deceleration does not overload the DC link. The maximum detection window equals the shift per motor revolution multiplied by 1,024 revolutions, allowing long motion sequences before the axis requires homing.
The unit provides machine-ready status data through 700 in-position output points and 16 position output signal lines. When integrated into a PLC hierarchy, its dedicated communication port supports a cable length of 1 km, while an additional SV-LINK channel reaches 400 m. Operation is permitted at up to 90% RH under noncondensing conditions. Built-in monitoring shuts down motion if that threshold is exceeded, helping protect internal circuits and the absolute encoder from moisture-related faults. The controller supports a peak armature current of 100 A. Embedded resistors absorb regenerative surges without requiring external braking hardware.
