Product Description:

Introducing the FS1D075P12 component from Sanyo Denki’s F SANMOTION Servo Amplifiers product line. This model is rated for input voltages between 70 V and 90 V and provides an output voltage of 12 V ±2%. The device has a maximum load current of 1.5 A which helps in achieving desired results with minimum use of power. These outstanding electrical characteristics give the capability of functioning within a predetermined set of conditions with a guarantee of control precision while minimizing design complexity.

This servo amplifier unit has an efficiency of up to 87% along with a switching frequency of 300 kHz. It reliably operates within the wide temperature range of –40°C to +85°C. Further, the machine provides an isolation voltage of 1500 V as this basically ensures minimal power loss and stable performance in extreme environmental conditions with enhanced safety by preventing electrical faults and interference. The precise control feedback can be guaranteed with response times in the sub-microsecond range. Moreover, it offers built-in overcurrent and thermal shutdown protection and is easy to mount on PCBs because of its surface mount package.

The thermal resistance from junction to ambient is around 50°C/W, and the datasheet recommends a PCB footprint outline to be followed according to IPC standards. Other characteristics show that the variant FSID075P12 is present in a QFN package, maintains a no-load current of 10 mA, and has an operating frequency tolerance of ±2%. The device’s ambient temperature derates above nominal at about 0.5% per °C, and it is soldered with RoHS compliant lead-free solder.