BS1D200C09
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships in 3 Days
The Sanyo Denki BS1D200C09 belongs to the F SANMOTION Servo Amplifiers series and operates with an input voltage ranging from 4.5V to 5.5V. It features a basic step angle adjustable from 0.72° to 0.00288° per pulse. The amplifier's rotor inertia varies from 0.03 to 0.275 kg·m².
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
BS1D200C09 is a motor driver. It is part of Sanyo Denki’s Sanmotion F series and is designed for control of compatible stepping motors. The driver requires 24/36 Volts DC power input. It supplies 2 Amps per phase motor output current. Interface on the unit is CMOS. The control power source voltage is 5 Volts Dc. The main circuit power source current is 3 Amps. Protection class of the unit is Class III. The driver complies with the applicable standard which is EN6010-1 and UL508C. The manufacturer recommends 0 to 50 degrees Celsius ambient temperature for operation and -20 to 70 degrees Celsius temperature for driver storage. For operation the relative humidity range is 35 to 85% and for storage the humidity range is 10 to 90%. Elevation of the installation site can be up to 2000 meters above sea level.
| Mass of the BS1D200C09 driver is 90 grams. Operators can select functions, including step angle, stop current, pulse input mode, and operating current. Open phase protection is available on the driver unit. LEDs provide diagnostic information about power supply and alarms. The command pulse input signal for the driver is CMOS with 4 to 5.5 Volts high level and 0 to 0.5 Volts low level. The driver is compatible with H series stepper motors. Height of the driver unit is 56 millimeters, its width is 29 millimeters, and its breadth is 64 millimeters. The driver conforms to the low voltage and EMC directives as required by the CE mark. The cable connecting the controller to the driver can be up to 2 meters in length and the cable to the motor can up to 2.8 meters in length.
Frequently Asked Questions about BS1D200C09:
Q: How can you select the input method?
A: The driver has DIP switches for input selection.
Q: What is the wire size for the power supply?
A: Wire size for the power supply is 22 AWG.
Q: What is the wire size for I/Os?
A: The wire size for I/Os is 24 AWG.
Q: What is the power supply voltage?
A: The power supply voltage is 24/36 Volts DC.
Q: What is the control voltage?
A: The control voltage is 5 Volts DC.
