KT1-67ZA150MXXXC04 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
39 Seconds
The KT1-67ZA150MXXXC04 is a servo amplifier with passive cooling and a compact design, weighing just 300 grams. Manufactured by Sanyo Denki as part of the BL Super Servo Amplifiers series, it supports up to 8 axes control and has a high-speed EtherCAT interface. This model consumes approximately 19.2 W of power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The KT1-67ZA150MXXXC04 is a servo amplifier unit from Sanyo Denki. It regulates the operation of servo motors in industrial systems that necessitate precise motion control. The device is compatible with a variety of motors that require real-time speed and location control.
The KT1-67ZA150MXXXC04 servo amplifier works within an ambient temperature range of 0°C to 55°C that must be free from condensation or icing. Its storage temperature goes from -20°C to 85°C. The humidity range must be between 20% and 90% RH and not condense. The unit can be installed at the maximum altitude of 1000 MSL. It can handle vibrations of 4.9 m/s² from 10 to 60 Hz. The r and t terminals are AC power input lines. RL1, SL2, and TL3 are power connections that can also be used as DC bus lines or motor outputs. The motor is given 3-phase AC power through W, V, and U. The COM port is the reference or ground line. It has 15 pins and is called a D-sub connector. CN1 is usually used for PLC or external control data. CN2 is a 20-pin interface that can be used for command I/O or encoder input. RDY1 and RDY2 are two more LEDs that show that the system is ready, and CHARGE is an LED that shows that voltage is present on the DC bus.
The KT1-67ZA150MXXXC04 servo amplifier has two cooling fans inside that help keep the temperature stable while it's working. It has a metal vent housing that lets air flow and an aluminum heat sink that moves heat well. For uses that need feedback from encoders and accurate motor synchronization, the servo amplifier is a good choice.
