67ZA200JC77B00 Sanyo Denki
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
24 Seconds
The 67ZA200JC77B00 servo amplifier offers 16 digital input points with a rated input voltage of 24 VDC, 8 digital output points supporting up to 0.5 A per point, and passive cooling. Part of the BL Super Servo Amplifiers series by Sanyo Denki, it supports up to 8 axes of control and operates reliably in temperatures from 0°C to 55°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 67ZA200JC77B00 servo amplifier is a motion control device manufactured by Sanyo Denki. It's made to give exact power and control to servo motors in automated systems.
The 67ZA200JC77B00 servo amplifier comes with a terminal block that has power and signal connections labeled with names like CHARGE, GNZ1, and GNZ2. The terminal block is protected by a cover. It shows diagnostic codes and real-time status info on a 7-segment LED screen. A green POWER LED and a READY status LED are two LED signs. The amplifier has a flat ribbon connector for control signal interface or PLC contact and two D-Sub connectors for RS-232 or encoder connections. There is also a smaller port that is probably used to add an optional card or for programming. The case is made of metal and has mounting holes and flanges on the sides for fixing to a panel or a DIN rail. There are ventilation grills on several sides that let air flow over the internal parts. Thermal management is helped by a large heat sink or transformer housing placed on the back.
The 67ZA200JC77B00 servo amplifier can work in temperatures ranging from 0°C to 55°C and can be stored at temperatures ranging from -20°C to 85°C. In situations where it is not condensing, the relative humidity range is 20% to 90% RH. The amplifier is designed to operate ideally up to 1000 meters above sea level. It is capable of withstanding vibrations at a rate of 4.9 m/s² during the 10 to 60 Hz frequency range. The unit works the same way across a wide range of mechanical and thermal conditions. The feedback circuits are rapid, and signals can be transmitted rapidly between motor drivers.
