Product Description:

The 68AA100VFE01 is a highly efficient servo amplifier from Sanyo Denki. This amplifier is internationally renowned for its ability to maintain high-performance standards while consuming significantly low amounts of electrical energy. This amplifier belongs to the ABS super product series; it is designed for direct panel mounting inside a control cabinet that can supplement its IP20 housing and protect it from dust and water splashes. The input voltage requirement for this product is about 200 volts; this voltage is delivered through a power supply unit. The output voltage supply from this product is about 200 volts. The amplifier can also provide an impressive nominal power supply as high as 1000 watts. For optimum operation, this product requires a consistent current supply of about 1.6 to 2.2 amperes. The leakage current that can be produced from the power circuit of this product can be as high as 3.5 milliamperes; this relatively high leakage current makes it necessary for operators to ensure that the amplifier is properly grounded before it is switched on for operation. The voltage frequency of the 68AA100VFE01 is between 50 to 60 hertz. The is an air blower installed at the rear of the housing of this product; this blower produces an air current that eliminates heat through forced ventilation. The connection terminals on this product are screw terminals; proper wiring requires the technical skills of well-trained personnel. This product is also a perfect choice for customers in cold regions; the amplifier can maintain its high-performance status at ambient temperatures as low as 10 degrees below freezing temperature. The typical operation efficiency level of this product is greater than 85 per cent. The 68AA100VFE01 is UL listed and CE certified.