PMB33E-00100-02 Pacific Scientific
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
38 Seconds
The Pacific Scientific PMB33E-00100-02 is a brushless servomotor from the PMB Brushless Servomotors series with a NEMA Size 34 motor and a flat shaft design. It uses flying leads with AMP connectors and includes a resolver sensor with a PTC thermistor for protection. The nominal stall current at 240 Vac max is 7.4 ARMS, and it features a stack length multiple of 3.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PMB33E-00100-02 is a brushless servomotor manufactured by Pacific Scientific. It is part of the PMB Brushless Servomotors series. It is intended for closed-loop positioning duties in automated pick-and-place heads, carton erectors, or light gantry axes where fast response and repeatable accuracy are required without the added compliance of belts or gearboxes. Its brushless construction supports smooth torque production and fast command response in compact motion systems that require accurate starts, stops, and short indexing moves.
The motor is built around a NEMA Size 34 frame, so its 3.4-inch square face and standardized pilot diameter suit common NEMA 34 mounting patterns. When the shaft is locked, the winding can draw up to 7.4 ARMS at 240 VAC, a value the servo amplifier must sustain to hold static loads without overheating. The current rating is especially important during holding or low-speed operation, when the amplifier must manage heating while maintaining commanded torque. Rotor position is returned through a brushless Resolver, providing angular feedback and strong immunity to electrical noise that can upset digital encoders. Because the feedback element is brushless, it avoids contact wear in long-duty automation service. Installation is simplified by Flying leads with AMP connectors; these pigtails let the cable pass through machine conduit before the electrical connection is made.
A Flat shaft end offers a drive surface that suits couplings secured by set screws without adding shaft diameter. The motor uses a stack length multiple of 3, giving the stator a medium magnetic volume for applications that need more continuous torque than a single-stack motor while still favoring a compact size. To monitor winding temperature, a built-in PTC Thermistor changes resistance sharply near the allowable heat rise, enabling the drive to reduce current before insulation damage occurs. This type of thermal protection is useful on axes that cycle frequently or remain stationary under load for extended periods.
Frequently Asked Questions about PMB33E-00100-02:
Q: What type of shaft design is used on the PMB33E-00100-02 servomotor?
A: This model features a flat shaft design for its mechanical connection.
Q: What is the nominal stall current for the PMB33E-00100-02 servomotor at 240Vac?
A: The PMB33E-00100-02 motor has a nominal stall current of 7.4 ARMS when operated at 240Vac maximum.
Q: What sensor type does the PMB33E-00100-02 servomotor utilize?
A: The PMB33E-00100-02 uses resolver feedback for position detection.
Q: Does the PMB33E-00100-02 servomotor include any temperature protection features?
A: A PTC thermistor is included for temperature monitoring in this servomotor.
Q: What type of connector is supplied with the PMB33E-00100-02 servomotor?
A: This model is equipped with flying leads terminated in AMP connectors.
