PMB33C-10216-02
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The PMB33C-10216-02 is a NEMA Size 34 brushless servomotor with a peak torque of 16.1 Nm (142 lb-in). Manufactured by Pacific Scientific, it is part of the PMB Brushless Servomotors series, featuring a rated speed of 1,300 RPM and continuous stall torque of 5.4 Nm (48.0 lb-in). It weighs 6.3 kg (13.8 lbs).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The PMB33C-10216-02 lands in the PMB Brushless Servomotors line made by Pacific Scientific. Here, a NEMA Size 34 layout sets the motor up with the right fit for machine frames that want strength but don’t want too much weight. This servomotor cranks out 5.4 Nm of continuous stall torque and tops out at 16.1 Nm for peak bursts—a handy amount for those heavy lifting moments in automation. With a rated speed at 1,300 RPM, the shaft gets reliable motion, not too slow or too quick for steady equipment drive. The overall weight comes in at 6.3 kg, so mounting this makes sense where some bulk is needed but not overkill.
Sensing stays sharp with a digital encoder supplying 4096 ppr resolution, so feedback to the drive system won’t get lost even if shifts come quick. There’s a winding type marked C and 3.8 A nominal stall current, keeping the electrical side balanced for repeated use in wider setups. Going further, continuous stall current clocks in at 2.9 A RMS, and peak current lands right around 8.7 A RMS. The winding and stack arrangement (here with 3 stacks) means extra torque for high-cycle moments, and a rotor inertia of 0.40 kg·cm² keeps starts and stops neat without wasting movement through overshoot.
With flying leads and MS connectors here for the wiring, the install’s quick with industrial plug style and fewer loose wires to fuss over. As voltage, 240 V AC is standard, but running off a 320 V DC bus in some panels works just the same. The shell covers against bumps and gives a stable setup right at connection points, backed by that precise commutating encoder feedback. The shape slides into motion platforms, CNC stages, packing arms or conveyors, and won’t fall short on accuracy or lasting strength.
Frequently Asked Questions about PMB33C-10216-02:
Q: What is the peak torque of the PMB33C-10216-02 servomotor?
A: The peak torque of the PMB33C-10216-02 servomotor is 16.1 Nm (142 lb-in).
Q: What type of encoder does the motor utilize?
A: The PMB33C-10216-02 uses a digital encoder with commutation.
Q: What is the continuous stall torque of this servomotor?
A: The continuous stall torque of the PMB33C-10216-02 servomotor is 5.4 Nm (48.0 lb-in).
Q: What is the rated speed of the PMB33C-10216-02?
A: The rated speed of the PMB33C-10216-02 servomotor is 1,300 RPM.
Q: What is the weight of the PMB33C-10216-02 servomotor?
A: The PMB33C-10216-02 servomotor weighs 6.3 kg (13.8 lbs).
