Product Description

It is always better to learn about the spare parts and values of MIV08-3-V5 before making the right decision. The MIV08-3-V5 is a noteworthy AC spindle drive from Okuma. This has a MIV Inverter Spindle as drive type with a capacity of 7.5 kW. The inverter control board type over here is ICB3 and it makes use of either VAC motor or IPM motor as its major motor type. This drive part has Control ROM of Type 5. The MIV units from Okuma will indicate the unit capacity along with its motor type, inverter controlling board and control ROM. The firmware has three versions namely, firmware for ICB, ICB-F and ICB-H.

An MIV unit comprises of 1-axis Feed shaft and PLC axis. It comes with the PREX motor or the BL motor. The configurations of the items under this particular unit set have an inverter unit, control board and display card. The construction of MIV08-3-V5 will be quite simple and will comprise of major parts such as internal and external cooling fans, heat sink, inverter control board, unit case, power board and power device.

Now, it is mandatory for you to learn more about the list of the applicable BL motors. For the BL based motor drive, there are two types of axis available, 1 and 2. While changing the MIV units, the items are always in need of special attention. The MIV Unit comprises of a large capacitance capacitor right in the end. While changing the MIV unit, you have to shut the power off first and then wait till the charge indicator lamp is turned off. For that, you need to wait for a minimum of 2 minutes after you have shut off the power and then get to work.