Product Description:

Made by Okuma and falling under the E4809 CNC Boards family, the E4809-770-099-D is a CNC control board Operating with a 100 to 240 VAC input voltage range at 50/60 Hz, it can handle up to 240 watts of electricity. With a weight of around 1.2 kg, the board boasts robust construction and overvoltage protection. Made in Japan and meant for industrial-grade dependability, it is usually used for exact motion control in CNC machines, this type is compatible with servo amplifiers. It provides three-axis servo control as well as remote device integration with Okuma control systems. Processing motion orders sent via a 2K-byte FIFO buffer from a host computer, the E4809-770-099-D provides position and status data using the same buffer and has a rooted CPU. With dimensions of 35 mm x 320 mm x 150 mm, the small design lets one install easily in space-limited surroundings. It may be kept at temperatures between -20 and +80°C and run between 0 and +40°C. The board can operate in conditions with up to 95% humidity and is suitable for usage at heights up to 1000 meters above sea level. It likewise resists vibration and dust. The board consists of seven digital outputs and eight digital inputs along with a 2500 Vrms optical coupler for precise direction sensing and hardware fault detection. Its DDA (Digital Differential Analyzer) is software-based and allows flexible speed management and smooth command division. Pitch error correction, limit switch auto-protection, and support for many operating modes including open loop, closed loop, and simulation are among other features. The E4809-770-099-D is kept in a panel-mounted form factor intended for CNC control console installation. It maintains a strong interface for harsh industrial situations and links via industrial signal connections. Related models consist of the circuits boards A911-2196 and 1911-2196.