E4809-045-122-D Okuma
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
4 Seconds
The E4809-045-122-D electronic control board features a voltage rating of 24V DC, an operating temperature range from -10°C to +60°C, and dimensions of 135 mm x 90 mm x 30 mm. Part of the E4809 CNC Boards series by Okuma, it includes RS232/RS485 communication interfaces and 12 input and 8 output points for versatile functionality.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The E4809-045-122-D board is a control and memory handling board by Okuma made for CNC machines. It helps keep the system running smoothly and keeps data safe when the system shuts down. The board is meant to work with electrical systems that are already in use in industrial automation.
To keep the settings, the power must be turned off before it can be removed, but the battery connection must be kept. Compatible EPROM readers are needed to read from memory. The board uses a number of logic and memory driver ICs that come in DIP packages. Power is controlled by transistors in the TO-220 and TO-92 styles and voltage controllers. For screening power, electrolytic capacitors like 25V 470μF and 50V types are put in place. Also there are red and blue film capacitors that help separate the signals and block noise. To connect to a backplane or daughterboard, use a big male header with many pins. Edge connectors that are smaller are used for ribbon or system bus connections. With this board user can utilize OPUS software to back up parameters without removing the board from the CNC machine.
Across logic sections, capacitors make sure that the voltage source stays the same. Integrated connectors allow users to route data in different ways and bring systems together. Different memory entry methods are needed for ICs that need to be programmed in-circuit or that are socketed. Film capacitors block electrical noise that can mess up signals. Logic integrated circuits (ICs) control how systems work. For consistent operation, the voltage regulators keep the source voltages stable. Through the OPUS software interface, parameters can be saved before the actual board is serviced. It can be set up in CNC modes without losing machine data.
