E4809-045-060-F Okuma
Wake Industrial LLC is not an authorized distributor of this product.
The E4809-045-060-F O-Ring is crafted from fluorocarbon (Viton/FKM), has an inside diameter of 4.5 mm, a cross-section of 0.6 mm, and a hardness of 75 Shore A. Part of the E4809 CNC Boards series by Okuma, it offers excellent chemical resistance and meets ISO 3601 standards for reliable performance.
Internal Product Review
The E4809-045-060-F control board by Okuma ensures high-precision CNC operation through grounding for EMI control, TTL encoder input, and robust IC-managed motor feedback. Through-hole construction enhances serviceability. For higher elevation operations, it features altitude support up to 2000 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The E4809-045-060-F Control Board is produced by Okuma and used in industrial automation. The blue potentiometers used in this board help in assessing limits, gains, and feedbacks. A VGA-style blue connector is located on the front for interfacing. To indicate faults and status, the board is equipped with seven different LEDs. The TTL (Transistor-Transistor Logic) type rotary encoder (1024 PPR) input operates on a 5V logic level.
The voltage inputs on the E4809-045-060-F control board include +12V and ±15V regulated DC for control operation. It is built to withstand demanding industrial environments under continuous operation. It supports humidity levels between 10 - 85% (must be non-condensing). It is assembled using through-hole and DIP components for service convenience. Analog and digital feedback paths support control loop accuracy and consistency. The E4809-045-060-F control board supports both HCM-1.2 and HCM-1.8 motors. It includes several multi-pin headers for input and output expansion. The motor control and signal processing are executed through onboard integrated circuits. The unit includes grounding points to reduce EMI and electrical interference. It is designed for Okuma’s LDU-TR motor applications in CNC operations. Working temperature is supported between 0°C and 55°C during use.
The E4809-045-060-F control board maintains precise real-time control during axis positioning. Reference labels are printed clearly on the surface for fast diagnosis. DIP switches allow onboard control configuration during setup and calibration. Manual tuning is enabled via accessible adjustment resistors on the board. It can withstand vibration levels up to 0.5G. The allowed storage temperature range spans from -20°C up to 70°C. The operating input voltage frequency compatibility for this board is 50 Hz and 60 Hz. The system runs on three-phase power from a compatible power source. The unit can operate at altitudes reaching 2000 meters.
