E4809-045-019-F
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Okuma E4809-045-019-F, part of the E4809 CNC Boards series, features a durable O-Ring design made from Fluorocarbon (FKM/Viton). It has a 4.5 mm inside diameter and a cross-section thickness of 1.9 mm, as well as excellent resistance to oils, fuels, and solvents. The O-Ring complies with ISO 3601.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Okuma designed the E4809-045-019-F circuit board that operates as a link between the CNC controller and axis drive modules by handling signal timing, position feedback and motor logic control. Okuma leads manufacturing industries with its superior and simple products that are widely used in industrial automation.
The E4809-045-019-F circuit board is referred to as the OPUS 5000 II SVP main axis board that works as an industrial-grade unit. It includes socketed EPROM chips marked SVPE1050BU and SVPE1050BL with each offering 64 KB of firmware capacity by allowing stable field-replaceable software storage. It uses large-scale integration ICs by including microcontrollers and data buffers placed in parallel for synchronous processing. It supports precise timing and real-time command execution. A total of four plug-ins are installed vertically with housing logic gate arrays and interface drivers for signal routing. Multiple 34-pin and 50-pin blue ribbon connectors are mounted on the edge which aids in communication with servo modules, sensors and diagnostic tools. A gold-fingered edge interface connects it to a system backplane within a modular enclosure.
The E4809-045-019-F circuit board lower-left side includes a CP-3607 module by TDK which handles voltage regulation and transient suppression. Several radial electrolytic capacitors are grouped near power handling sections for voltage stability. It also uses fuse points and test leads for service operations. It controls motor shaft rotation, torque balance and stop-start movement by interpreting commands from the controller. It delivers consistent electrical instructions to motors during load shifts and directional changes. The Wake Industrial provides a year warranty for the replacement of this board in case of an issue. It functions as the control core for various embedded systems.
Frequently Asked Questions about E4809-045-019-F:
Q: How much memory does the EPROM on the E4809-045-019-F board store?
A: It stores 64KB per chip, used for embedded firmware required for motion timing and machine command execution.
Q: Does the E4809-045-019-F board include signal connectors for external modules?
A: Yes, it has multiple 34-pin and 50-pin ribbon connectors to link sensors, I/O modules, and drive systems.
Q: What is the CP-3607 module seen on the E4809-045-019-F board used for?
A: The TDK CP-3607 module is used for transient voltage suppression and helps maintain stable input supply.
Q: How does the E4809-045-019-F interface with Okuma backplane systems?
A: It connects via a gold-finger edge slot which enables system-level power and signal integration.
Q: What type of capacitors are used on the E4809-045-019-F board?
A: It uses radial electrolytic capacitors for voltage filtering and ceramic capacitors for high-frequency stability.
