E4509-045-110-B
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The E4509-045-110-B endmill features a diameter of 4.50 mm, a length of cut of 11.0 mm, an overall length of 45 mm, and a 45° helix angle. Part of the E4809 CNC Boards series manufactured by Okuma, it is constructed from carbide with a TiAlN coating and maintains a precise h6 tolerance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The E4509-045-110-B is a Programmable Logic Controller (PLC) Board produced by Okuma for use in various automation industries all over the world. This product is built with sophisticated technologies, allowing it to meet the high operation requirements with little risk of machine failure. The product also has a significantly low cost of ownership, requires no frequent maintenance and has a long service life. During operation, this PLC board receives input signals from sensors and other devices, processes these signals, and sends out the appropriate output signals to actuators and other output devices that will execute specific actions. The E4509-045-110-B board is built for use with Okuma motors and devices; with proper handling, its operation efficiency level can be as high as 95 per cent. The power consumed by this product is also very small compared to conventional products with similar performance capacity.
The E4509-045-110-B is able to withstand mild vibrations and humidity levels of between 10 to 90 per cent. However, complete protection against dust and contact with water should be provided to the board. Also, environmental temperature levels should be kept between 0 to 50 degrees Celsius. The operation of this product should be restricted to industrial applications.
The E4509-045-110-B is classified as an “EndMill”, it has a diameter of 4.50 millimeters, it is also about 11 millimeters long and 45 millimeters wide. The material used in the production of the board is carbide; it is also coated with TiAIN material. The warranty provided on this product by Wake Industrial lasts for about 12 months; it covers any fault that occurs during the proper use of the unit. Also, the peak installation height for this product is about 1000 meters above sea level.
Frequently Asked Questions about E4509-045-110-B:
Q: How long does it take for the E4509-045-110-B to be shipped?
A: The E4509-045-110-B is shipped for delivery as soon as customer's order is confirmed.
Q: Can the E4509-045-110-B be used in hot areas?
A: Yes. This product is able to withstand ambient temperature as high as 50 degrees without a reduction in its performance standards.
Q: What is the best mounting position for the E4509-045-110-B?
A: The E4509-045-110-B is designed to be mounted inside a control cabinet. It can be installed in any orientation.
Q: Is the operation of the E4509-045-110-B affected by temperature?
A: Yes. Operators are required to maintain the ambient temperature of this product between 0 to about 50 degrees.
Q: Is the E4509-045-110-B environmentally friendly?
A: Yes. The proper installation of the E4509-045-110-B does not have any negative effect on the environment.
