Product Description:

The E0451-680-005 is a servo power supply unit built by Okuma for use in industrial automation systems. This amplifier has a compact and extremely durable housing unit that is able to shield it against most foreign interference like dust and water splashes. The power supply unit weighs a total of about 4.3 kilograms; its housing design is also intended for rack mounting. The housing material of this product is stainless aluminum; this housing is particularly desirable as it is not prone to corrosion and can withstand mechanical stress. There are up to four communication interface integrated into this product; these are labelled from CN1 to CN4. The E0451-680-005 generates leakage current during its operation. To prevent accidental electrical shocks, it should be properly grounded before it is switched, integrated and operated in the servo system.

The E0451-680-005 has a power rating of about 100 watts, its voltage requirement is also about 24 volts. The power supply unit does not generate a high amount of heat during normal operation; it is also able to eliminate excess heat through the natural process of convection or radiation from its housing unit. The minimum operating ambient temperature for this product is about -20 degrees Celsius; it can also withstand an ambient temperature as high as 60 degrees Celsius without a reduction in its performance standards.

The E0451-680-005 is about 100 millimeters long and 50 millimeters wide, it also has a thickness of approximately 30 millimeters. There is a handle attached to the top of this power supply unit to make the transportation of the product easy for operators. There is a 12 month warranty provided for this product by Okuma. This power supply unit is sensitive to heat; the recommended humidity level for the product is between 20 to about 90 per cent.