Product Description:

Built for industrial applications seeking consistent torque delivery and accurate control, the Okuma BL-MQ50E-20TB is a robust as well as high-performance AC servomotor from the BL Servo Motors line. Operating at a steady 3000 rpm (Revolution per minute), this motor comes with a rated power output of about 5.0 kW (kilo watt) as well as a nominal torque of 50 Nm. Housed in an IP65-rated box, it uses air cooling to ensure reliable operation in settings subjected to dust as well as low-pressure water jets. Approximately 45 kg (kilo grams) in weight, the motor blends power with practical form factor. The BL-MQ50E-20TB works in concert with a drive system with a built-in power dump circuit fuse to maintain system reliability and security.||Often the consequence of grave braking under high-inertia loads or error circumstances, this fuse safeguards against prolonged power loss brought on by extended dump action. The fuse will blow up to stop heat damage if the dump remains engaged too long. High-inertia applications ought to take into account the maximum safe load inertia to avoid power dump overburdening. For example, the ML3475 allows up to 70 kg·cm², but the ML3450 motor endorses up to 40 kg·cm² when employed with the BL150 drive.||Though they are small figures, surpassing them does not automatically ensure failure; real outcomes rely on surrounding variables, duty cycles, and deceleration curves. Okuma suggests that clients evaluate these measures carefully and refer to the Okuma motor drive combination graphs in the technical manual for more exact application matching. While giving thermal safety along with application flexibility first priority, the Okuma BL-MQ50E-20TB provides a strong solution for dynamic control of motion.