Part Number:

S7720C-FBF2-PM

Manufacturer: Kollmorgen
Series: S700 Servo Drive Series
  • Rated 4.5 (31 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Call for Expedited Shipping and Product Condition Options
Free Ground Shipping
Worldwide Delivery
Repair Options Available

The S7720C-FBF2-PM Kollmorgen digital servo amplifier has a voltage rating of 3 x 208 to 480 VAC. This servo amplifier must be cooled before touching it after its power has been disconnected. It can be connected to a third-party stepper motor controller.

Part Number:

S7720C-FBF2-PM

Manufacturer: Kollmorgen
Series: S700 Servo Drive Series
  • Rated 4.5 (31 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
  • Call for Expedited Shipping and Product Condition Options
Free Ground Shipping
Worldwide Delivery
Repair Options Available

The S7720C-FBF2-PM Kollmorgen digital servo amplifier has a voltage rating of 3 x 208 to 480 VAC. This servo amplifier must be cooled before touching it after its power has been disconnected. It can be connected to a third-party stepper motor controller.

Preparing your secure checkout page...

Warranty
1-year-warranty Wake Industrial Warranty
Shipping
DHL Logo FedEx Logo
UPS Logo Freight Logo
DHL Logo FedEx Logo UPS Logo Freight Logo
Payment
Visa Logo AmEx Logo
Mastercard Logo Wire transfer Logo
Visa Logo AmEx Logo Mastercard Logo Wire transfer Logo
To Speak to a sales representative for pricing and lead time:

Product Description

The S7720C-FBF2-PM Kollmorgen digital servo amplifier encompasses a coldplate. This servo amplifier is set up using the DRIVEGUI.EXE parameters. The product is cleaned using isopropanol or a similar agent and a dry brush. This device should not be opened by the user as doing so forfeits its warranty. The unit has a very hot surface during the operation phase. It is necessary to wait until the housing surface has cooled to below 40 °C before touching it. This amplifier has a nameplate for identification on its side.

The product behavior is determined by how several of its parameters have been set. This device must be earthed safely to the protective earth busbar in the switch cabinet. The unit must be checked to see that its DC bus link voltage is below 50 V before handling its components. It has a cooling time of approximately 10 minutes after the power is removed. This amplifier can be supplied from 1-phase or 3-phase earthed industrial supply networks.

The product can be associated with a DC input only after the user has performed the necessary reviews and evaluations for system dielectric requirements, fuse protection, branch circuit protection, and more. This device gets damaged due to improper DC power polarity. The unit can control the holding brake of a motor. It has a FB-2x1 expansion card for feedback extension. This servo amplifier supports simultaneous digital primary and analog secondary feedback connections at the X1 connector. The product also has a controlled fan in the second expansion card slot. This device features cogging suppression capability. The unit offers fast feedback evaluation. It is integrated with an IEC 61131 macro programming language. This amplifier has two analog outputs with a resolution of 0.38 mV.

S7720C-FBF2-PM Technical Specifications

Family: S700
Protection Rating: IP 20
Mounting Orientation: Vertical
Expansion Card in Slot 1: FB-2 to 1 (X1)
Expansion Card in Slot 2: Fan Control
Expansion Card in Slot 3: PosI/O
Warning Notes: Yes
RS 232 Interface: Yes
Memory Card Type: MMC and SD
Setup Software: DRIVEGUI.EXE

Frequently Asked Questions about S7720C-FBF2-PM


Q: What are the minimum PC requirements for installing the setup software of the S700 amplifier?

A: The minimum PC requirements for installing the setup software of the S700 amplifier are a Pentium II or comparable processor, a Windows compatible color graphics adapter, at least 10 MB of free hard disk space, and one serial interface.

Q: What is the input resistance of the analog inputs of the S700 amplifier?

A: The input resistance of the analog inputs of the S700 amplifier is 20 kiloOhms.

Q: Can the S700 amplifier be stacked one on top of the other?

A: Yes, the S700 amplifier be stacked one on top of the other and the maximum stacking height is three cartons.

Q: How is the motor cable shield connected to the bottom of the shielding plate of the S700 amplifier?

A: The motor cable shield is connected to the bottom of the shielding plate of the S700 amplifier through a shield connection.

Q: What built-in protection measures does the S700 amplifier have?

A: The S700 amplifier has built-in protection measures shielding and insulation.

Internal Product Review

  • ‘‘S7720C-FBF2-PM digital servo amplifier can be connected to a third-party stepper motor controller and must be installed in a switchgear cabinet.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo