M.3000.0915 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Kollmorgen M.3000.0915 is a standalone smart drive belonging to the MMC Standalone Smart Drives series. It features a digital interface, 0.5 kW of output power, and supports three-phase power with a 24 VDC nominal enable supply. The drive uses a 9-position screw strip for AC power connections and a 26-pin HD D-shell for drive I/O, and includes safe-off functionality.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.3000.0915 smart drive is produced by Kollmorgen within the MMC Standalone Smart Drives series. It is a standalone servo amplifier that integrates control logic, power conversion, and machine-safety functions to operate fractional-kilowatt motors on packaging lines, small conveyors, and pick-and-place axes. By combining these elements in a single enclosure, the drive reduces panel depth and simplifies installation in distributed automation architectures. It connects directly to industrial mains and provides dedicated I/O, allowing rapid integration with standard control cabinets on the factory floor.
Its continuous output is rated at 0.5 kW, a limit matched to small actuators while leaving capacity for brief accelerations. The power stage runs from a three-phase supply, delivering balanced line currents to the motor. A nominal 24 VDC enable line must be active before the inverter energizes, keeping control wiring isolated from the mains. Command data arrive through a digital port, so speed or position setpoints reach the drive without analog noise. A panel indicator displays readiness with a green power LED, while a yellow status LED reports faults. The built-in safe-off circuit removes torque without disabling the control logic, and the narrow housing conserves rail space.
Field wiring is grouped by function to simplify installation and maintenance. The AC input connects to a nine-position screw terminal strip for line and ground conductors. A four-position pluggable terminal strip carries bus-link and regenerative-resistor leads, so deceleration energy is handled separately from the mains. The DC link exits through a six-position cage-clamp terminal that secures auxiliary drive or capacitor leads. Control signals connect through a 26-pin high-density D-shell connector, and a separate 15-pin port routes encoder feedback to the F1 channel. The separation of power and signal paths simplifies fault tracing and helps preserve signal integrity. Pluggable and cage-clamp connections also allow conductors to be secured without routing them through a shared terminal block.
