M.1302.8132 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1302.8132 is part of the MMC Standalone Smart Drives series and has a power rating of 2 kW with a weight of 5.7 pounds. This smart drive features a peak output current of 30 Amps, two RJ-45 digital link ports, and a 26-pin HD D-Sub drive I/O port. The continuous output current is 10 Amps and the nominal input power is 4.0 kVA.
Internal Product Review
The M.1302.8132 is a Kollmorgen MMC standalone smart drive with a 2 kW power rating and 10 A continuous output current. Fast control behavior comes from a 125 µsec current regulator update and 250 µsec velocity regulator update, which supports precise motion tuning. A 30 A peak output current makes the drive an excellent choice for demanding automation axes.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1302.8132 is a stand-alone smart drive from Kollmorgen supplied under the MMC Standalone Smart Drives series. This digital drive module conditions three-phase mains power and delivers controlled output to servo or induction motors in automated machinery, removing the need for a separate motion controller. By integrating power electronics, signal processing, and fieldbus ports in a single enclosure, the unit streamlines cabinet wiring and provides decentralized speed and torque regulation for packaging lines, material handlers, and general factory automation.
At the power stage, the drive continuously supplies 10 A to the motor windings, allowing steady operation within its thermal capacity. For rapid acceleration, it can deliver a peak current of 30 A for short intervals, and the input bridge can withstand a line-charging surge of 70 A at startup. Under normal operating conditions, the mains side draws 18 A RMS, resulting in a nominal input power of 4.0 kVA for midrange motion axes such as pick-and-place gantries. Current loops are refreshed every 125 µs, while velocity corrections occur every 250 µs, allowing the drive to react quickly to command changes.
The output stage modulates carrier pulses at frequencies up to 266 Hz, providing electrical bandwidth for high-speed spindles or tightly geared axes. It accepts feedback devices that generate signals at frequencies up to 720 kHz, supporting compatibility with fine-pitch encoders. Overall shaft power is rated at 2 kW, while internal power dissipation is limited to 70 W. Two RJ-45 digital link ports support daisy-chained communication between drives, while a 26-pin HD D-Sub connector provides discrete I/O connections for limit switches. A 6-pin Mini-DIN PicPro port provides service access, and the fully digital interface helps reduce susceptibility to analog noise. The enclosure weighs 5.7 lb (2.59 kg), allowing it to be mounted on sliding trays without adding excessive load.
