M.1302.8130 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1302.8130 is a smart drive from the MMC Standalone Smart Drives series. It features a rated power of 0.5 kW and delivers a continuous output current of 2.5 Amps with a peak output current of 7.5 Amps. The drive weighs 4.9 pounds and measures 9.69 inches in height and 3.69 inches in width.
Internal Product Review
The M.1302.8130 is a Kollmorgen standalone smart drive that stands out with 0.5 kW rated power and 2.5 A continuous output current. Peak output current of 7.5 A and nominal input power of 1.0 kVA support stable motion performance during dynamic load changes. A 420 VDC bus overvoltage threshold is a strong indicator of dependable DC bus control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1302.8130 is a standalone servo drive produced by Kollmorgen within the MMC Standalone Smart Drives series. The unit combines power conversion, axis control, and safety logic in a single housing, supplying precision current to brushless servomotors used on packaging lines, pick-and-place modules, and material-handling stations. By integrating drive intelligence at the machine frame, it reduces cabinet wiring and allows distributed motion nodes to exchange commands over the selected fieldbus.
The drive delivers a rated mechanical output of 0.5 kW, while its input stage is sized for 1.0 kVA of apparent power, so the supply must handle reactive and real loads. Normal operation draws 5 A RMS from the AC line, and the inverter can provide 2.5 A of continuous phase current to the motor for steady-state motion. Voltages above 420 VDC on the bus trigger an overvoltage fault. A 70 A inrush current flows when the DC link charges, so input contactors and fuses need sufficient surge tolerance. The control section requires a 24 V rail; at startup, that rail can momentarily draw 1.5 A before settling to 350 mA.
The energy stored in the link is moderated by a 1410 µF DC-bus capacitor that smooths ripple and supports the converter during regenerative braking. During acceleration, the output bridge can provide 7.5 A of peak current per phase, while internal dissipation remains limited to 22 W to support panel thermal management. The 24 V subsystem consumes only 9 W, so auxiliary power supplies do not require large reserves. The housing has a narrow profile, with an overall height of 9.69 inches and a width of 3.69 inches, supporting high-density stacking without obstructing airflow. Installation weight is 4.9 lb (2.23 kg), which supports mounting on machine frames and gantries. BiSS encoder feedback is not supported, so the drive must be paired with a feedback protocol compatible with the MMC platform.
