M.1302.5245 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1302.5245 is part of the MMC Standalone Smart Drives series and features an AC line filter with a protection rating of IP20. This drive has a rated current of 30 Amps at 40°C and operates on 3 phase 480VAC supply at 50 or 60Hz. It weighs 1.3 kilograms and has a typical power loss of 12 watts.
Internal Product Review
The M.1302.5245 is an AC line filter for Kollmorgen MMC Standalone Smart Drives, rated for 30A at 40°C and designed for supply voltages up to 480VAC. IP20 protection and typical power loss of 12W support efficient panel integration, making this filter a strong choice for dependable drive system input conditioning.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1302.5245 is a Kollmorgen drive from the MMC Standalone Smart Drives series. It combines a power stage, an AC line filter, and onboard control electronics in a single device for installation in a control panel. The drive regulates motor speed, torque, and position without requiring a separate motion controller. It connects directly to the facility’s AC supply and produces the pulse-width-modulated output needed for precise axis control. Suitable applications include conveyors, feed systems, and light material-handling equipment where compact installation and integrated motion control are required.
At a cabinet temperature of 40 °C, the drive can deliver a continuous output current of 30 A. Above that temperature, the continuous current is reduced at a rate of 1.4% per °C to control thermal loading. The input section accepts up to 3 × 480 VAC from a three-phase supply operating at a line frequency of 50/60 Hz. Its IP20 housing helps prevent incidental finger contact with live components when the unit is installed inside a suitable enclosure. Screw terminals accommodate conductors up to 10 mm², supporting secure power connections without oversized terminal adapters. The insulation withstand levels are 2.7 kVDC from phase to ground and 2.1 kVDC from phase to phase under test conditions of 25 °C for two seconds. These voltage levels indicate the electrical isolation provided between the input phases and grounded surfaces.
The drive is suitable for installation at altitudes up to 2000 m, where reduced air density can limit heat transfer from internal components. During typical operation, it dissipates 12 W, which contributes to the total heat load that must be managed within the control enclosure. The unit has a mass of 1.3 kg, allowing it to be secured to a DIN rail or backplate without placing a substantial load on the mounting surface. Its compact arrangement reduces the panel space required for the power stage, line filtering, and motion control functions. Adequate enclosure airflow and installation clearances should be maintained so the drive can release heat during continuous operation.
