M.1302.5244 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1302.5244 belongs to the MMC Standalone Smart Drives series and comes with a rated current of 16 Amps, operating on a 3 phase supply at 50 or 60 Hz. The drive offers a maximum supply voltage of 480 VAC, features an IP20 protection rating, and weighs 1.0 kilogram. Current derating is 1.4 percent per degree Celsius above 40 degrees Celsius, and the device has a typical power loss of 8 watts.
Internal Product Review
The M.1302.5244 is a Kollmorgen MMC Standalone Smart Drive with 3-phase input and a 16 A rated current. IP20 protection and a 480 VAC maximum supply support dependable cabinet integration in standard industrial service. A typical power loss of 8 W gives the drive an efficient operating profile, making M.1302.5244 a strong choice for motion control applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1302.5244 is a standalone servo drive manufactured by Kollmorgen for the MMC Standalone Smart Drives series. The module combines power electronics, control logic, and fieldbus connectivity in a compact housing, allowing it to command a matched servomotor directly from the plant mains. Embedded motion functions help shorten wiring runs and conserve cabinet space while maintaining deterministic torque and speed regulation. The unit operates as the final power stage in packaging, material-handling, and small robotic axes that require fast current loops. Its integrated architecture supports applications where responsive motor control and compact panel installation are important.
The drive accepts a three-phase mains supply at up to 480 VAC with a network frequency of 50/60 Hz. Under rated conditions, it delivers a continuous output current of 16 A, providing capacity for medium-frame servomotors. The IP20 enclosure protects against accidental contact with internal components but requires installation inside a suitable control cabinet. The terminal block accepts motor and line conductors with cross-sectional areas up to 4 mm². The insulation system has a phase-to-ground withstand capacity of 2.7 kVDC for two seconds and a phase-to-phase withstand capacity of 2.1 kVDC for two seconds. Internal power dissipation remains moderate, which helps limit temperature increases within the panel during normal operation.
Continuous current capacity decreases by 1.4% per °C when the ambient temperature rises above 40 °C, so cabinet ventilation must account for operation at elevated temperatures. Installation is permitted at elevations up to 2000 m, beyond which additional derating is required. At nominal load, the drive releases approximately 8 W of heat from internal losses, reducing the cooling burden on the enclosure. The assembled unit weighs 1.0 kg, allowing secure DIN-rail mounting without additional support brackets. Its low mass also reduces the mechanical load placed on the mounting rail during equipment movement or vibration. Adequate spacing around the housing should be maintained so naturally circulating cabinet air can carry heat away from the drive.
