M.1015.6917 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen M.1015.6917 is part of the MMC Standalone Smart Drives series and has a rated voltage of 250 VAC with a rated current of 10 Amps at 50°C. This drive supports 150% overload for one minute and 200% overload for one second, and it weighs 0.95 kg. It features electric strength up to 2500 VAC for one minute and a power loss of 2.7 W at full load.
Internal Product Review
The M.1015.6917 is a Kollmorgen MMC Standalone Smart Drive designed for stable single-phase 250 VAC operation. Overload capability of 150% for 1 minute and 200% for 1 second supports confident handling of transient demand. A rated current of 10 A at 50°C gives the unit strong practical value for compact motion systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The M.1015.6917 is a standalone smart drive manufactured by Kollmorgen within the MMC Standalone Smart Drives series. It combines control logic, power electronics, and a motor interface in a compact housing that connects directly to a single-phase power supply. When installed in an automated line, the drive supplies regulated current and voltage to a connected motor so that conveyor segments, feed screws, or small actuators can maintain repeatable motion profiles without an external cabinet-mounted controller. This integrated arrangement reduces the number of separate control components required near the driven axis.
Electrical insulation is rated at 2500 VAC for one minute, providing separation between the power circuit, chassis, and signal references. The input stage accepts up to 250 VAC, making it compatible with common factory power systems while remaining within the operating limits of its internal semiconductors. At an ambient temperature of 50 °C, the drive can deliver a continuous phase current of 10 A at 50 °C to a connected motor without derating. Protective filters limit ground leakage current to 46 mA at 240 V and 50 Hz, supporting use in permanently wired equipment. At full load, the drive dissipates 2.7 W, which helps limit heat buildup inside the enclosure. The unit operates from single-phase power, simplifying the mains connection in compact machines and installations without a three-phase supply.
For transient demands, the power section tolerates an overload of 150% for one minute and a peak surge of 200% for one second. These overload capacities accommodate short acceleration demands or jam-recovery events without immediately activating protective functions. The housing has four M4 tapped back-mounting holes and two M6 drilled side flanges, allowing installation on a panel or support bracket. Spring-clamp terminal blocks accept a wiring cross-section of 2 × 2.5 mm², while the terminal clamping screws use M4 threads. The assembly weighs 0.95 kg, allowing it to be mounted on moving carriages where reduced mass can help limit the mechanical load during rapid movement.
