Product Description:

The VP-508CEAN-12 is a pre-assembled motor power cable produced by Kollmorgen within the Kollmorgen Servo Cables series. It routes three-phase drive output and protective ground between a servo amplifier and its matched motor. This supports reliable power delivery and electromagnetic shielding in automated machinery. Its factory-terminated construction also helps maintain consistent connection quality at both ends of the assembly. Because the power conductors and protective ground are grouped in one sheath, the cable keeps the drive-to-motor link compact and easier to route through enclosed spaces.

With a length of 12 m, the cable spans standard machine frames without intermediate junctions. Each of its four leads uses 14 AWG stranded copper to carry phase and ground current. Rated for up to 600 V line-to-line and a continuous load of 12 A, the assembly fits typical Kollmorgen drive outputs. A TPE outer jacket resists oil and weld spatter, and an overall braid provides shielding across the cable run. Operation is allowed in enclosures up to 105 °C ambient, and the circular bundle maintains an outside diameter of 10.25 mm. The design also uses four individually color-coded conductors to simplify wiring identification.

During installation, the cable’s physical profile supports predictable routing. An assembly mass of 1.784 kg keeps suspended chain loads moderate, while a minimum bend radius of 102.5 mm helps prevent jacket or shield overstress in fixed trays. The pre-molded motor end uses an M23 connector whose face measures 27.5 mm across, and the molded body length of 96 mm with a 101.6 mm breakout section provides space for strain relief inside machine chambers without kinking. Both dynamic and static flex capabilities are not specified, so the cable is intended for stationary runs rather than continuously moving carriers. The round profile also sits neatly in standard clamps and pass-through openings. These dimensions suit fixed cable paths between control cabinets and motor connection points where clearance must be maintained.