P5-21-015-A5-00-004000 Kollmorgen
Wake Industrial LLC is not an authorized distributor of this product.
The Kollmorgen P5-21-015-A5-00-004000 is a power cable from the Kollmorgen Servo Cables series with a length of 4 meters and a main conductor size of 1.5 square millimeters. It has a PVC jacket, a voltage rating of 1000 V, and can operate at temperatures up to 80 degrees Celsius. This mid-flex cable supports max acceleration of 5 m/s², velocity of 10 m/s, and has an outside diameter of 10.5 millimeters.
Internal Product Review
The P5-21-015-A5-00-004000 is a Kollmorgen servo power cable with a 1000 V rating and SpeedTec (C or G) motor connector compatibility. Mid-Flex construction and an 80 °C temperature rating support dependable performance in moving cable applications. The 1000 V rating is a strong advantage for servo power distribution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The P5-21-015-A5-00-004000 power cable is produced by Kollmorgen for the Kollmorgen Servo Cables series. It is a dedicated motor supply lead that routes drive output power to AKM or similar servo motors fitted with SpeedTec-style connectors. In machine tools, packaging lines, and material-handling cells, this cable carries phase current and protective earth between the cabinet-mounted amplifier and the moving axis. This provides the electrical path required for closed-loop motion while accommodating movement between stationary control equipment and the driven motor.
Its length of 4 m provides enough reach for typical short-stroke axes while keeping voltage drop minimal. The insulation system is certified for up to 1000 V, so the cable can be used with regenerative drives that have high DC-bus voltages without derating. During continuous flexing, the conductors may bend to a radius no smaller than 63 mm, protecting the PVC jacket and the 1.5 mm² copper cores from cyclic fatigue. When the axis accelerates, the cable may travel at up to 10 m/s and withstand acceleration reaching 5 m/s². An outside diameter of 10.5 mm simplifies routing through drag chains and permits the use of compact gland plates. These properties also help prevent excessive mechanical strain where the cable enters moving carriers or fixed enclosures.
For stationary harness segments, the minimum bend radius is 42 mm, which eases installation inside control enclosures. The PVC formulation and shielding remain stable at temperatures up to 80 °C, maintaining dielectric strength when exposed to cabinet and motor-side heat. With a mass of only 0.168 kg/m, the cable adds little moving weight and reduces the load placed on drag-chain assemblies. Its Mid-Flex rating indicates a service life suitable for drag chains with moderate operating cycles. The SpeedTec C or G connector option provides keyed, quarter-turn locking and does not require field crimping. The cable should be routed with adequate clearance from sharp edges and secured so that movement does not place tension directly on either connector.
